Modeling and Multivariate Methods - SAS

94 Fitting Standard Least Squares Models Chapter 3
Factor Profiling
Example Using the Contour Profiler
1. Open the Tiretread.jmp sample data table.
2. Select Analyze > Fit Model.
3. Select ABRASION, MODULUS, ELONG, and HARDNESS and click Y.
4. Select SILICA, SILANE, and SULFUR and click Macros > Response Surface.
5. Click Run.
6. From the red triangle menu next to Least Squares Fit, select Profilers > Contour Profiler.
Figure 3.31 Contour Profiler
Choose the axes of
the contour plot.
Slide or edit to move the
cross hairs and change the
current predicted values.
Slide or edit to change the
corresponding contour line.
Shades the area
outside the limits.