Preliminary C8051F120/1/2/3 C8051F124/5/6/7 - KEMT FEI TUKE

More documents

Recommendations

Info

C8051F120/1/2/3 C8051F124/5/6/7 Preliminary Table 13.1. Reset Electrical Characteristics -40°C to +85°C unless otherwise specified. PARAMETER CONDITIONS MIN TYP MAX UNITS /RST Output Low Voltage I OL =8.5mA,VDD=2.7Vto3.6V 0.6 V /RST Input High Voltage 0.7 x VDD V /RST Input Low Voltage 0.3 x VDD /RST Input Leakage Current /RST = 0.0 V 50 µA VDD for /RST Output Valid 1.0 V AV+ for /RST Output Valid 1.0 V VDD POR Threshold (V RST ) 2.40 2.55 2.70 V Minimum /RST Low Time to Generate a System Reset 10 ns Reset Time Delay /RST rising edge after VDD crosses V RST threshold 80 100 120 ms Missing Clock Detector Timeout Time from last system clock to reset initiation 100 220 500 µs Page 160 DS008-0.8-AUG02 © 2002 Cygnal Integrated Products, Inc.
Preliminary C8051F120/1/2/3 C8051F124/5/6/7 14. OSCILLATORS C8051F120/1/2/3/4/5/6/7 devices include a programmable internal oscillator and an external oscillator drive circuit. The internal oscillator can be enabled, disabled and calibrated using the OSCICN and OSCICL registers, as shown in Figure 14.1. The system clock can be sourced by the external oscillator circuit, the internal oscillator, or the on-chip phase-locked loop (PLL). The internal oscillator's electrical specifications are given in Table 14.1 on page 163. Figure 14.1. Oscillator Diagram OSCICL OSCICN CLKSEL Option 3 XTAL1 XTAL2 IOSCEN IFRDY IFCN1 IFCN0 CLKDIV1 CLKDIV0 CLKSL1 CLKSL0 Option 2 VDD XTAL1 Option 4 XTAL1 Option 1 XTAL1 XTAL2 EN Calibrated Internal Oscillator Input Circuit OSC n 00 01 SYSCLK PLL 10 XTLVLD XOSCMD2 XOSCMD1 XOSCMD0 XFCN2 XFCN1 XFCN0 OSCXCN 14.1. Programmable Internal Oscillator All C8051F12x devices include a programmable internal oscillator that defaults as the system clock after a system reset. The internal oscillator period can be adjusted via the OSCICL register as defined by Figure 14.2. OSCICL is factory calibrated to obtain a 24.5 MHz frequency. Electrical specifications for the precision internal oscillator are given in Table 14.1. Note that the system clock may be derived from the programmed internal oscillator divided by 1, 2, 4, or 8, as defined by the IFCN bits in register OSCICN. © 2002 Cygnal Integrated Products, Inc. DS008-0.8-AUG02 Page 161
Page 1 and 2:
Preliminary C8051F120/1/2/3 C8051F1
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
© 2002 Cygnal Integrated Products,
Page 45 and 46:
© 2002 Cygnal Integrated Products,
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110: Preliminary C8051F120/1/2/3 C8051F1
Page 159: Preliminary C8051F120/1/2/3 C8051F1
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
show all

Preliminary C8051F120/1/2/3 C8051F124/5/6/7 - KEMT FEI TUKE

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?