Advanced POWER Virtualization on IBM System p5 - Previous ...

6.3 Point-in-time and recurring reconfiguration
Point-in-time reconfiguration for partitions and PLM policies are both possible.
These are described in this section.
6.3.1 Partition reconfiguration
The HMC provides a mechanism to perform point-in-time or periodic
reconfiguration of the partitions it is controlling through the Scheduled
Operations window of the HMC Configuration window, as shown in Figure 6-23.
Figure 6-23 HMC Configuration and Schedule Operations windows
Select the partition for which you wish to program a dynamic reconfguration (in
the above example, VIO_client2), and press OK, which will bring up the
Customize Scheduled Operations window, as shown in Figure 6-24 on page 417,
which pops up the Add a Scheduled Operation window, as shown in Figure 6-25
on page 417.
416 <strong>Advanced</strong> <strong>POWER</strong> <strong>Virtualization</strong> on IBM System p5