This section is available on request - MAN Diesel & Turbo

MAN B&W 5.11
Engine Seating and Holding Down Bolts
The latest version of most of the drawings of th<strong>is</strong>
<strong>section</strong> <strong>is</strong> <strong>available</strong> for download at www.mandiesel.com
under ‘Marine’ → ‘Low Speed’ → ‘Installation
Drawings’. First choose engine series, then
engine type and select ‘Engine seating’ in the
general <strong>section</strong> of the l<strong>is</strong>t of drawings <strong>available</strong> for
download.
Engine seating and arrangement of holding
down bolts
The dimensions of the seating stated in Figs.
5.12.01 and 5.12.02 are for guidance only.
The engine <strong>is</strong> designed for mounting on epoxy
chocks, EoD: 4 82 102, in which case the underside
of the bedplate’s lower flanges has no taper.
The epoxy types approved by MAN Diesel are:
• ‘Chockfast Orange PR 610 TCF’ from
ITW Philadelphia Resins Corporation, USA
• ‘Durasin’ from Daemmstoff
Industrie Korea Ltd
• ‘Epocast 36’ from
H.A. Springer - Kiel, Germany.
MAN B&W MC/MC�C, ME/ME-C/ME�GI/ME�B engines
MAN Diesel
Page 1 of 1
198 41 76�5.7