12.07.2015 Views

GP-B Post-Flight Analysis—Final Report - Gravity Probe B - Stanford ...

GP-B Post-Flight Analysis—Final Report - Gravity Probe B - Stanford ...

GP-B Post-Flight Analysis—Final Report - Gravity Probe B - Stanford ...

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Figure 8-9. Solar Array (Average) Temperatures for Mission DurationThere are many thermal sensors located throughout the spacecraft; however, some of the most important onesfor estimating the lifetime of the mission are located on the dewar Vacuum Shell. A thermal model wasdeveloped by Lockheed Martin for the entire spacecraft. This model produced estimates for temperatures of keysystems for the different sun angles the vehicle would experience. During the mission these estimates werecontinually compared with the actual temperatures experienced on orbit. For the most part the actual andpredicted temperatures matched up quite well. The one exception lies in the dewar vacuum shell temperatures.As mentioned earlier, the differences between the thermal model and the actual on orbit values has beenextensively studied and is discussed in detail in Chapter 12, Cryogenic Subsystem Analysis. Figure 8-10 displaysthe actual temperature data taken over the course of the mission for the forward dewar vacuum shell, andFigure 8-11 displays the temperature data for the aft dewar vacuum shell.<strong>Gravity</strong> <strong>Probe</strong> B — <strong>Post</strong> <strong>Flight</strong> Analysis • Final <strong>Report</strong> March 2007 211

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!