12.07.2015 Views

GP-B Post-Flight Analysis—Final Report - Gravity Probe B - Stanford ...

GP-B Post-Flight Analysis—Final Report - Gravity Probe B - Stanford ...

GP-B Post-Flight Analysis—Final Report - Gravity Probe B - Stanford ...

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Figure 10-3. SQUID Readout Electronics (SRE) – Aft UnitsAt most one AFT SRE is operated at any one time. The AFT SREs manage power and communications for theforward SRE/TRE units. They also contain a payload processor running software particular to the SRE/TRE andan oven controlled crystal oscillator (OCXO), which provides a single accurate timing to all the payloadelectronics.Figure 10-4 below contains a diagram of the SRE sub-system architecture.Figure 10-4. SQUID Readout Electronics (SRE) – Sub-system ArchitectureThe cross-strapping shown in Figure 10-4 above provides full redundancy of the AFT electronics and partialredundancy of the forward boxes. In the event of a failure of a single forward SRE, SQUID temperature control(BTC) may be maintained on both remaining SQUIDs using the remaining forward unit.<strong>Gravity</strong> <strong>Probe</strong> B — <strong>Post</strong> <strong>Flight</strong> Analysis • Final <strong>Report</strong> March 2007 287

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!