12.07.2015 Views

GP-B Post-Flight Analysis—Final Report - Gravity Probe B - Stanford ...

GP-B Post-Flight Analysis—Final Report - Gravity Probe B - Stanford ...

GP-B Post-Flight Analysis—Final Report - Gravity Probe B - Stanford ...

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Figure 13-8. UV lamps and the gyro electrostatic discharge systemThe two UV lamps are located on the lower spacecraft frame, and their light is carried to the gyro housings,inside the <strong>Probe</strong>, through fiber optic cables.13.1.3.4 Proton MonitorThe Proton Monitor is a modifiable system designed to monitor the <strong>GP</strong>-B’s environment and detect anddistinguish in between protons, electrons and other charged particles/cosmic rays.Figure 13-9. The <strong>GP</strong>-B Proton Monitor boxThe ECU sends and receives 16-bit proton monitor commands from the spacecraft’s main computer(CCCA/CCCB) via the 1553 bus at a rate up to and including 10.0 Hz.13.1.3.5 ECU Survival HeaterDesigned to maintain the Aft ECU Operational Temperature Range, the Aft ECU baseplate survival heaterprotects the UV Lamps from low temperature damage. They thermostatically maintain a temperature inbetween 0 and 4 Celsius.13.1.3.6 Vacuum GaugeThe ECU provides +30V, 3W max. power and 2 channels of telemetry for each of two high vacuum gauges.,used to measure probe pressure during high probe pressure events.<strong>Gravity</strong> <strong>Probe</strong> B — <strong>Post</strong> <strong>Flight</strong> Analysis • Final <strong>Report</strong> March 2007 357

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!