VSH Turòa nad Bodvou - Nemetschek Scia

3
CAE Civil Works
MM Projekt, Ing. Miroslav Maèièák
Address Bastova 6 • 060 01 Kezmarok (SK)
Telephone +421 524522275
Fax +421 524684171
Contact Mr Miroslav Maèièák
Email mmacicak@stonline.sk
Website www.mmprojekt.sk
The firm MM Projekt of Ing. Miroslav Maèièák was founded in
the year 1996.
It is active in the region of the High Tatras for 10 years now.
We have been taking part in many important investing projects,
the main activity is the design of building constructions and the
engineering of structures. From our initial cooperation with
an architect at creating the constructors’ philosophy from the
statics point of view, continuing by project design or preparing
economical possibilities of used materials on supporting structures.
We are also dealing with aerial cableways in cooperation
with the Slovak company Tatrapoma, a.s.
Our company is equipped with Cad PC, on which we are able to
process information of the project, documentation of the structure,
statics from architectural object studies, the structure of
the project for the building permit, up to the own inspection.
Our studio offers complete project documentation of structure
statics, structure diagnosis, whereupon we secure our expertness,
quality and professionalism.
Our most important references are:
• Steel construction of the company Plastiflex Slovakia, 192
tons (manufacturing documentation);
• 24 storied block of flats - Kežmarok, Slovakia (ferro concrete
cast construction using of Predos ceiling couple plates);
• Additional building of the Grand Hotel Praha - Tatranská
Lomnica, Slovakia (mixed construction of ferro concrete,
brickwork material);
• Aerial cableway TS 2 IGORA Sankt Petersburg, Russia (length
of oblique route 944,20m);
• Aerial cableway TS 4 Gladenskaja Sajanagorsk, Russia (length
of oblique route 1348 m);
• Aerial cableway TS 3 Portásovy Boudy in Velká Upa, the
Czech Republic (length of oblique route 1464 m).
Used software • SCIA•ESA PT
82 SCIA User Contest 2007 • Category 3 • CAE Civil Works
Bridge for pedestrians over the Poprad River
Bridge for pedestrians
The project is about a footbridge over the Poprad
River. It is a triple-pole suspension bridge; the main
bearing member is a joist, of which leaning cable
suspensions reduce the span. The function of cables
and pylons is evident and comprehensible at first
sight.
Ropes, cable ropes with a small diameter vanish in
the whole picture and the construction has a very
pleasant effect.
The steel construction is made of all-welded, rolled
IPE bridge floor profiles with framework stiffeners.
The bridge has a length of 63,94 m, from this length
a total of 52,927 m is a steel construction; the width
is 2,95 m.
The ropes are steel coiled single-row transformed
STN 02 4315 with a nominal diameter of 35,3 mm
(1+6+12+18+24+30), the nominal wire resistance is
1370 Mpa/mm2 .