Condair Dual 2 manual.pdf

Mount the base plate (only systems equipped with a “Booster”):
5
5. If your system is equipped with a “Booster”, now mount the base plate
in the tub. The base plate is attached to the tub ledge by pop rivets,
behind the post evaporation unit.
Important! If your system has no service door behind the post-evaporation
unit, now place the booster elements in the duct, just behind the base plate.
Connect two-part vertical sections:
6
M6x12
6. For systems with two-part vertical sections first connect all sections
with the connector pieces “A” (2 pcs. per connection) and the M6x12
hexagon socket screws (9 pcs. per connection).
21