Condair Dual 2 manual.pdf

6.3 Removal and installation of components
6.3.1 Removal and installation of ceramic plates
60
Removal of ceramic plates
Note: If the ceramic plates of a rear row (viewed in flow direction) must be
removed, the ceramic plates of the adjacent front rows must be dismantled
first. The removal sequence of the ceramic plates is always from top to
bottom.
Proceed as follows to remove the ceramic plates of a row:
1
1. Loosen the screws, then remove the upper flow sheet.
2. On both sides remove the two-part lateral plate sealings of the topmost
ceramic plate (or the respective ceramic plate, respectively).
3 4
3. Push upper plate sealings upwards until they come to a stop.
4. Remove the anti-drip sheet(s) (only on rear plate rows and if present).
2