Condair Dual 2 manual.pdf

Condair Dual 2
Commissioning protocol
/
Starting point of booster pump [%]
Booster pump at flushing on / off?
Silver ionization off / on?
Ionization current, actual / nominal value [mA]
Name of test engineer
Date
Time
Client
Contact/supporter
/ / / /
Remaining capacity of silver electrodes [Ah]
Working hours [h]
Next maintenance [h]
Controller on / off?
Nominal humidity value (only if controller is active) [%rh]
P-range (only if controller is active) [%]
Integral time (only if controller is active) [min]
Output limitation [%]
Analog signal range
Error history
Software version
Working pressure at full load, w/o pump [bar]
Working pressure at full load, with pump [bar]
Hose connectors leak-proof?
Booster pump leak-proof?
Nozzle connections leak-proof?
Monoblock leak-proof?
Routing of drain Y5 ok?
Height of drain (siphon trap) at monoblock ok?
Location of humidifier/internal number
Type of monoblock
Unit type Condair Dual
Serial number
Location of central unit
Number of control steps (3-step or 7-step)
Type of control signal
Measured mains voltage [V]
Nominal humidification output [kg/h]
Actual humidification output [kg/h]
Signal at analog input [%]
Booster pump internal/external?
Permeate conductance [µS/cm]
Permeate limit [µS/cm]
Output of spray valve Y6 [kg/h]
Output of spray valve Y7 [kg/h]
Output of spray valve Y8 [kg/h]
Notes:
Page