Condair Dual 2 manual.pdf

Install the lateral flow sheets:
26
ø3.3 mm
26. Fix the two-part lateral flow sheets to the duct wall using the self-tapping
screws provided (drill holes ø3.3 mm before). First mount the lower part
of the lateral flow sheets, then the upper one (the upper part must
overlap the lower one).
Important! Make sure the lateral flow sheets are flush with the duct roof
and the duct floor.
Important! Make sure the lateral flow sheets overlap the vertical
sections by a sufficient amount.
Important! Make sure the lateral flow sheets are tightly screwed at
every oblong hole.
Finally, seal the junctions between the lateral flow sheets and the duct
walls with sealing compound.
33