R_Bibb_Medical_Modelling_The_Application_of_Adv.pdf

126 Medical modelling
4. Eufi nger H, Wehmoller M (1998), ‘Individual prefabricated titanium implants
in reconstructive craniofacial surgery: clinical and technical aspects of the fi rst
22 cases’, Plastic Reconstructive Surgery, 102 (2), 300–308.
5. Gateno J, Allen M E, Teichgraeber J F, Messersmith M L (2000), ‘An in vitro
study of the accuracy of a new protocol for planning distraction osteogenesis
of the mandible’, Journal of Oral and Maxillofacial Surgery, 58 (9), 985–
90.
6. Sailer H F, Haers P E, Zollikofer C P, Warnke T, Carls F R, Stucki P (1998),
‘The value of stereolithographic models for preoperative diagnosis of craniofacial
deformities and planning of surgical corrections’, International Journal of
Oral and Maxillofacial Surgery, 27 (5), 327–33.
7. Hughes C W, Page K, Bibb R, Taylor J, Revington P (2003), ‘The custom made
orbital fl oor prosthesis in reconstruction for orbital fl oor fractures’, British
Journal of Oral and Maxillofacial Surgery, 41, 50–53.
8. Heckmann S M, Winder W, Meyer M, Weber H P, Wichmann M G (2001),
‘Overdenture attachment selection and the loading of implant and denture
bearing area. Part 1: in vitro verifi cation of stereolithographic model’, Clinical
Oral Implants Research, 12 (6), 617–23.
9. Winder R J, Cooke R S, Gray J, Fannin T, Fegan T (1999), ‘Medical rapid
prototyping and 3D CT in the manufacture of custom made cranial titanium
plates’, Journal of Medical Engineering Technology, 23 (1), 26–8.
10. Heissler E, Fischer F, Bolouri S, Lehmann T, Mathar W, Gebhardt A, Lanksch
W, Bier J (1998), ‘Aesthetic and reconstructive surgery – custom-made cast
titanium implants produced with CAD/CAM for the reconstruction of cranium
defects’, International Journal of Oral and Maxillofacial Surgery, 27 (5),
334–38.
11. Minns R J, Bibb R, Banks R, Sutton R A (2003), ‘The use of a reconstructed
three-dimensional solid model from CT to aid surgical management of a
total knee arthroplasty: a case study’, Medical Engineering and Physics, 25,
523–6.
12. Munjal S, Leopold S S, Kornreich D, Shott S, Finn F A (2000), ‘CT generated
3D models for complex acetabluar reconstruction’, Journal of Arthroplasty, 15
(5), 644–53.
13. Nakajima T (1995), ‘Integrated life-sized solid model of bone and soft tissue:
application for cleft lip and palate infants’, Plastic Reconstructive Surgery, 96
(5), 1020–25.
14. Schwaderer E, Bode A, Budach W, Claussen C D, Danmmann F, Kaus T,
Plinkert P K (2000), ‘Soft-tissue stereolithography model as an aid to brachytherapy’,
Medica Mundi, 44 (1), 48–51.
15. Mankovich N J, Cheeseman A M, Stoker N G (1990), ‘The display of threedimensional
anatomy with stereolithographic models’, Journal of Digital
Imaging, 3 (3), 200–203.
16. Erben C, Vitt K D, Wulf J (2000), ‘First statistical analysis of data collected in
the Phidias validation study of stereolithography models’, Phidias Newsletter,
5, 6–7.
17. Sarment D P, Sukovic P, Clinthorne N (2003), ‘Accuracy of implant placement
with a stereolithographic surgical guide’, International Journal of Oral and
Maxillofacial Implants, 18 (4), 571–7.