R_Bibb_Medical_Modelling_The_Application_of_Adv.pdf

218 Medical modelling
2. Coward T J, Watson R M, Wilkinson I C (1999), ‘Fabrication of a wax ear by
rapid-process modelling using Stereolithography’, International Journal of
Prosthodontics, 12 (1), 20–27.
3. Bibb R, Freeman P, Brown R, Sugar A, Evans P, Bocca A (2000), ‘An investigation
of three-dimensional scanning of human body surfaces and its use in the
design and manufacture of prostheses’, Proceedings of the Institute of Mechanical
Engineers Part H, Journal of Engineering in Medicine, 214 (6), 589–94.
4. Cheah C M, Chua C K, Tan K H, Teo C K (2003), ‘Integration of laser surface
digitizing with CAD/CAM techniques for developing facial prostheses Part 1:
design and fabrication of prosthesis replicas’, International Journal of
Prosthodontics, 16 (4), 435–41.
5. Cheah C M, Chua C K, Tan K H (2003), ‘Integration of laser surface digitizing
with CAD/CAM techniques for developing facial prostheses Part 2: Development
of molding techniques for casting prosthetic parts’, International Journal of
Prosthodontics, 16 (5), 543–8.
6. Reitemeier B, Notni G, Heinze M, Schöne C, Schmidt A, Fichtner D (2004),
‘Optical modeling of extraoral defects’, Journal of Prosthetic Dentistry, 91 (1),
80–84.
7. Tsuji M, Noguchi N, Ihara K, Yamashita Y, Shikimori M, Goto M (2004),
‘Fabrication of a maxillofacial prosthesis using a computer-aided design and
manufacturing system’, Journal of Prosthodontics, 13 (3), 179–83.
8. Verdonck H W D, Poukens J, Overveld H V, Riediger D (2003), ‘Computerassisted
maxillofacial prosthodontics: a new treatment protocol’, International
Journal of Prosthodontics, 16 (3), 326–8.
9. Eggbeer D, Bibb R, Evans P (2004), ‘The appropriate application of computer
aided design and manufacture techniques in silicone facial prosthetics’, Bocking
C E, Rennie A E W, Jacobson D M (eds), Proceedings of the 5 th National
Conference on Rapid Design, Prototyping, and Manufacture, London, John
Wiley and Sons, 45–52, ISBN: 1860584659.
10. Evans P, Eggbeer D, Bibb R (2004), ‘Orbital prosthesis wax pattern production
using computer aided design and rapid prototyping techniques’, Journal of
Maxillofacial Prosthetics and Technology, 7, 11–15.
11. Sykes L M, Parrott A M, Owen C P, Snaddon D R (2004), ‘Application of rapid
prototyping technology in maxillofacial prosthetics’, International Journal of
Prosthodontics, 17 (4), 454–9.
12. Thomas K F (1994), Prosthetic Rehabilitation, London, Quintessence Publishing,
ISBN: 1850970327.
13. McKinstry R L (1995), Fundamentals of Facial Prosthetics, Arlington VA, USA,
ABI Professional, ISBN: 1886236003.
14. Seals R R, Cortes A L, Parel S (1989), ‘Fabrication of facial prostheses by
applying the osseointegration concept for retention’, Journal of Prosthetic
Dentistry, 61 (6), 712–16.
15. Postema N, van Waas M A, van Lokven J (1994), ‘Procedure for fabrication of
an implant-supported auricular prosthesis’, Journal of Investigative Surgery, 7
(4), 305–20.
16. Chen L C, Lin G C (1997), ‘An integrated reverse engineering approach to
reconstructing free-form surface’, Computer Integrated Manufacturing Systems,
10, 49–60.