Automatic control function programming manual ladder language

M63 M62 M65 M64
%Rg24.7 %Rg24.6 %Rg24.5 %Rg24.4 %Rg24.3 %Rg24.2 %Rg24.1 %Rg24.0
M69 M68 M67 M66
%Rg25.7 %Rg25.6 %Rg25.5 %Rg25.4 %Rg25.3 %Rg25.2 %Rg25.1 %Rg25.0
OUTIL1 to OUTIL8
OUTIL1 to OUTIL8
OUTIL1 to OUTIL8
OUTIL1 to OUTIL8
3.11.6 Outputs to Axis Groups
In this chart, g takes on the value of the axis group number (1 to 8)
%Rg24.B
%Rg25.B
%Rg7C.B
%Rg7D.B
%Rg7E.B
%Rg7F.B
*C_ C_
C_ C_
MODEg FASTg CRMg APPSSg ARBUTg VALIDg FMEXTg AUTAVg
%Wg00.B
%Wg00.7 %Wg00.6 %Wg00.5 %Wg00.4 %Wg00.3 %Wg00.2 %Wg00.1 %Wg00.0
**C_
M01g
**C_
SLASHg
C_DG
URGg
**C_
RAXg
C_
CYCLg
**C_
ARUSg
C_
RAZg
%Wg01.B
%Wg01.7 %Wg01.6 %Wg01.5 %Wg01.4 %Wg01.3 %Wg01.2 %Wg01.1 %Wg01.0
POTAV1 to POTAV8
* Valid only for PLC axis groups
** Valid only for CNC axis groups
MOD-GR1 to MOD-GR8
%Rg24.W
Decoded M functions on groups 1 to 8
(spindle status)
Variables
%Rg7C.L
Tool number requested by groups 1 to 8
%Wg00.W Control of groups 1 to 8
%Wg02.B Feed rate override potentiometer on groups 1 to 8
%Wg03.B Mode on independent group 1 to 8
en-938846/8 3 - 81
3