Automatic control function programming manual ladder language

A.2 Alphanumerical List
Function Description Page
anaa() Reassign an analogue card 9-7
anai() Read an analogue input 9-6
anao() Write an analogue output 9-5
anas() Configure an analogue I/O card 9-3
atoi() Convert an ASCII string to a signed integer of 32 bits 6-3
atoj() Convert an ASCII string to a signed integer of 32 bits 6-4
bcd_bin() BCD —> binary code conversion 6-5
bin_bcd() Binary —> BCD code conversion 6-6
bit() Separate bits into bytes 6-7
call() Jump to a module label with return 6-19
comctl() Control the serial line driver 12-11
comf() Select data rates and formats 12-4
comin() Read the reception buffer 12-7
comout() Send a buffer 12-6
comreg() Read the status of a serial line 12-10
cpyarg() Read the parameters stored on the stack 6-8
cpyb() Copy one or more bytes 6-9
cpyl() Copy one or more long words 6-11
cpyw() Copy one or more words 6-10
csbegin() Start a critical section 7-3
csend() End a critical section 7-3
diagiq() Set the self-test period 6-11
dtget() Read the current date and day in week 14-2
exec() Call an executable module 16-3
exechdl() Identify an executable module 16-4
goto() Jump to a module label without return 6-19
inig() Graphic init 8-17
itictl() Configure an interrupt input 11-6
itiget() Read an interrupt input 11-8
iti_gr() Associate an interrupt input with an axis group 11-5
itoa() Convert a signed integer to an ASCII string 6-12
itostr() Convert an unsigned integer to an ASCII string 6-12
neti() Read a request from a distant server 15-36
neto() Send a request to a distant server 15-34
netst_ad Answer a STATUS request 15-40
oct() Concatenate a byte into bits 6-13
pcur() Position the cursor 8-7
print() Display a buffer 8-8
printf() Display a string with format 8-9
putchar() Display a character 8-7
A - 6 en-938846/7