Automatic control function programming manual ladder language

AXIS 2
REMARK AXIS 2 must have the same name as AXIS 1.
AXIS 3
REMARK Same syntax as AXIS 1.
AXIS 4
REMARK AXIS 4 must have the same name as AXIS 3.
8 - 30 en-938846/6
Name of the horizontal axis and value of the right limit.
Name of the vertical axis and value of the low limit.
Name of the vertical axis and value of the high limit.
FORMAT: «.» VALUE Format of the decimal numbers for display of the reference system
limits. (e.g.: If format = .3, the value 10000 is displayed as 10.000).
VALUE Number of decimal digits. This argument is decimal.
Default value: 0.
LINE : «M» | «1», «2», «3», «4», «5» | Characteristic of the line used to draw the axes. Does not modify the
current type of line.
Default value: «1» (solid line).
Character Line type HEX code
«1» solid 0xB1
«2» dotted 0xB2
«3» dashed 0xB3
«4» combined 0xB4
«5» stylus raised (no line) 0xB5
COLOUR: «C» VALUE Colour of the axes. Does not modify the current colour.
VALUE Colour code (see Sec. 8.3.3). Expressed in decimal or hexadecimal.
Default value: current colour at the time of drawing.
Examples
Definition of a Reference System Chosen by Function inig(..)
0x9BB0 X0 X502 Y0 Y381 (LF)
Y
0
381
502
X