Automatic control function programming manual ladder language

12.1 General
The automatic control function controls 12 serial lines distributed as follows:
CNC processor Machine processor IT/Serial line card UCSII card
card card (max. 2 cards)
1060 Series I DNC - PERIPH RS232C - TTL Line 1 to line 4
1060 Series II RS232C - TTL Line 1 to line 4
Serial Lines
1060 Series II COMM 1 - COMM 2
The user programme can control data transfers with a peripheral in the context of special applications.
For more details on installation of these lines, refer to the Installation and Commissionning Manual.
Line Numbering
NUM 1060 Series I and NUM 1060 Series II (Multicard)
The line numbers are set once and for all on the CNC and machine processor cards:
- 0 for the machine processor TTL line,
- 1 for the machine processor RS232C line,
- 2 for the CNC processor DNC line,
- 3 for the CNC processor PERIPH line.
Numbers 4 to 7 are assigned to the first IT/SERIAL LINE card encountered in the rack and numbers 8 to B are assigned
to the second IT/SERIAL LINE card encountered (scanned from right to left).
IT/SERIAL LINE
card
NUM 1060 Series II NUM 1060 Series I
NUM 1060 Series II (UCSII)
8
9
A
B
4
5
6
7
Machine
processor
The line number is hard-wired on the UCSII card:
- 0 for the COMM1 line,
- 1 for the COMM2 line.
0
1
8
9
A
B
4
5
2
6
3
IT/SERIAL LINE CNC
card processor
7
0
1
Machine
processor
en-938846/3 12 - 3
12