Automatic control function programming manual ladder language

Detail of argument «cch»
9 - 4 en-938846/7
Card location
Channel number
Bit 7 Bit 0
Refer to the Installation and Commissioning Manual for the card location on the system bus.
The values 0 to 7 correspond to the channel numbers of the eight input registers or eight output registers.
Format of the configuration word
Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Return code
If OK
0
Error
1: Card absent.
2: Card parameter error.
Configuration (1 or 8 inputs)
0 = 1 input
1 = 8 inputs
Gain of analogue input 7
0 = gain of 1
1 = gain of 10
Gain of analogue input 6
0 = gain of 1
1 = gain of 10
Gain of analogue input 5
0 = gain of 1
1 = gain of 10
Gain of analogue input 4
0 = gain of 1
1 = gain of 10
Gain of analogue input 3
0 = gain of 1
1 = gain of 10
Gain of analogue input 2
0 = gain of 1
1 = gain of 10
Gain of analogue input 1
0 = gain of 1
1 = gain of 10
Gain of analogue input 0
0 = gain of 1
1 = gain of 10