Automatic control function programming manual ladder language

3.8.2.4 Negative JOG Commands: %WA.L
Variable Mnemonic Description
%WA.7 JOGNEG31 Negative jog on axis No. 31
to %WA.0 to JOGNEG24 to Negative jog on axis No. 24
%WB.7 JOGNEG23 Negative jog on axis No. 23
to %WB.0 to JOGNEG16 to Negative jog on axis No. 16
%WC.7 JOGNEG15 Negative jog on axis No. 15
to %WC.0 to JOGNEG8 to Negative jog on axis No. 8
%WD.7 JOGNEG7 Negative jog on axis No. 7
to %WD.0 to JOGNEG0 to Negative jog on axis No. 0
3.8.2.5 External Parameters E20000 to E20031: %WE.L
External parameters E200xx are written by the user programme. They are visible in the part programme.
They are used to make machine status data available to the part programme.
Variable Mnemonic Variable Mnemonic
%W11.0 E20000 %WF.0 E20016
%W11.1 E20001 %WF.1 E20017
%W11.2 E20002 %WF.2 E20018
%W11.3 E20003 %WF.3 E20019
%W11.4 E20004 %WF.4 E20020
%W11.5 E20005 %WF.5 E20021
%W11.6 E20006 %WF.6 E20022
%W11.7 E20007 %WF.7 E20023
%W10.0 E20008 %WE.0 E20024
%W10.1 E20009 %WE.1 E20025
%W10.2 E20010 %WE.2 E20026
%W10.3 E20011 %WE.3 E20027
%W10.4 E20012 %WE.4 E20028
%W10.5 E20013 %WE.5 E20029
%W10.6 E20014 %WE.6 E20030
%W10.7 E20015 %WE.7 E20031
Variables
en-938846/8 3 - 41
3