Automatic control function programming manual ladder language

Example
To position the cursor on LINE 2 COLUMN 34
LINE 2 (third line): 0x2 + 0x20 = 0x22
COLUMN 34 (35th column): 0x22 + 0x20 = 0x42
Command to be programmed: 0x9BBF 0x22 0x42
8.3.4.6 Deletion
The deletion instruction can be used in any space and format.
Delete to end of line
Delete to end of page
Clear page
8.3.5 Graphic Instructions
0x8E
0x8F
0x9C
Transparent Mode
8.3.5.1 Definition of the User Reference System
Instruction 0x9BB0 allows the user to define his own reference system and the applicable display characteristics
(colour, legend, etc.).
REMARK The limits are recomputed to obtain the same conversion factor on both axes.
Syntax
0x9BB0 AXIS 1 AXIS 2 AXIS 3 AXIS 4 { [FORMAT] [LINE] [COLOUR] } LF
AXIS1 : NAME [SIGN] VALUE Name of the horizontal axis and value of the left limit.
NAME Name of the axis
Defined by characters «A» to «Z», upper or lower case (generally X
and Y).
SIGN Sign of the limit value.
Algebraic «+» or «-» sign.
Default value: «+».
VALUE Value of the axis limit. (Decimal value in pixels).
en-938846/6 8 - 29
8