Automatic control function programming manual ladder language

Exchanges by Protocol
15 Exchanges by Protocol
15.1 General Description of Exchanges 15 - 3
15.1.1 General Description of the DNC1000
Protocol 15 - 4
15.1.2 DNC1000 Exchange Mechanism 15 - 5
15.1.2.1 Request Processing Procedure 15 - 5
15.1.2.2 Concept of Port 15 - 6
15.2 Objects Accessible by a UNITE Request 15 - 7
15.2.1 List of Object Type Requests Processed
by the CNC Processor 15 - 7
15.2.2 Object Constituents 15 - 9
15.2.3 Programme Status Segments 15 - 14
15.3 UNITE Requests Processed by the CNC Function 15 - 16
13.3.1 «READ-OBJECT» Request 15 - 16
15.3.2 «WRITE-OBJECT» Request 15 - 18
15.3.3 «DELETE-FILE» Request 15 - 19
15.3.4 «READ-MEMORY-FREE» Request 15 - 20
15.3.5 «OPEN-DIRECTORY» Request 15 - 21
15.3.6 «DIRECTORY» Request 15 - 22
15.3.7 «CLOSE-DIRECTORY» Request 15 - 24
15.3.8 «READ-BLOCK» Request 15 - 25
15.3.9 «WRITE-BLOCK» Request 15 - 26
15.3.10 «RESERVE-MEMORY» Request 15 - 27
15.3.11 «MESSAGE READ» Request 15 - 28
15.4 Programming the General Request Function 15 - 29
15.4.1 Send a Request unito 15 - 29
15.4.2 Read an Answer uniti 15 - 30
15.4.3 Programming Rules 15 - 32
15.5 Exchanges With a Remote Station 15 - 34
15.5.1 Send a Request neto 15 - 34
15.5.2 Read an Answer neti 15 - 36
15.5.3 Examples of Series 7 Addressing 15 - 38
15.5.4 Setting up the Common
Word Service setcomw 15 - 39
15.5.5 Answer to the STATU
Request netst_ad 15 - 40
en-938846/4 15 - 1
15