Automatic control function programming manual ladder language

8.3.5.8 Shift Screen Origin
Instruction 0x9BB7 is used to shift the origin of the screen reference system.
Transparent Mode
REMARK The other limit is recomputed so as not to modify the size of the reference system.
Syntax
0x9BB7 [DECHEX] { [X] [Y] } LF
DECHEX Selection of decimal or hexadecimal coordinates. Does not modify
the current coordinate type.
Default value: decimal.
X Value of the horizontal offset of the screen reference system.
Default value: Preserves the previous horizontal offset..
Y Value of the vertical offset of the screen reference system.
Default value: Preserves the previous vertical offset.
Example
To shift the origin of the reference system by 100 pixels on the X axis and 200 pixels on the Y axis
0x9BB7 X100 Y200 (LF)
8.3.5.9 Transfer Current Point
Instruction 0x9BE4 is used to align the current point of the screen reference system to the current point of the user
reference system.
Syntax
0x9BE4
en-938846/6 8 - 35
8