Environmental and health related criteria for buildings - ANEC
Environmental and health related criteria for buildings - ANEC
Environmental and health related criteria for buildings - ANEC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Environmental</strong> Criteria <strong>for</strong> Buildings<br />
C3 Solid Wastes<br />
C3.1 Solid waste resulting from the construction <strong>and</strong> demolition process.<br />
C3.2 Solid waste resulting from facility operations.<br />
C4 Rainwater, Stormwater <strong>and</strong> Wastewater<br />
C4.1 Liquid effluents from facility operations sent off the site.<br />
C4.2 Retention of rainwater <strong>for</strong> later re-use.<br />
C4.3 Untreated stormwater retained on the site.<br />
C4.4 N.A.<br />
C5 Impacts on Site<br />
C5.1 Impact of construction process on natural features of the site.<br />
C5.2 Impact of construction process or l<strong>and</strong>scaping on soil erosion.<br />
C5.3 Changes in biodiversity on the site.<br />
C5.4 Adverse wind conditions at grade around tall <strong>buildings</strong>.<br />
C5.5 Minimizing danger of hazardous waste on site.<br />
C6 Other Local <strong>and</strong> Regional Impacts<br />
C6.1 Impact on access to daylight or solar energy potential of adjacent property<br />
C6.2 Cumulative thermal changes to lake water or sub-surface aquifers.<br />
C6.3 Heat Isl<strong>and</strong> Effect - l<strong>and</strong>scaping <strong>and</strong> paved areas.<br />
C6.4 Heat Isl<strong>and</strong> Effect - roofing.<br />
C6.5 Atmospheric light pollution.<br />
C6.6 N.A.<br />
C6.7 N.A.<br />
D Indoor <strong>Environmental</strong> Quality<br />
D1 Indoor Air Quality<br />
D1.1 Protection of materials during construction phase.<br />
D1.2 Removal, be<strong>for</strong>e occupancy, of pollutants emitted by new interior finish materials.<br />
D1.3 Off-gassing of pollutants from interior finish materials.<br />
D1.4 Pollutant migration between occupancies.<br />
D1.5 Pollutants generated by facility maintenance.<br />
D1.6 Pollutants generated by occupant activities<br />
D1.7 CO2 concentrations in indoor air.<br />
D1.8 IAQ monitoring during project operations.<br />
D2 Ventilation<br />
D2.1 Effectiveness of ventilation in naturally ventilated occupancies.<br />
D2.2 Air quality <strong>and</strong> ventilation in mechanically ventilated occupancies.<br />
D2.3 Air movement in mechanically ventilated occupancies.<br />
D2.4 N.A.<br />
D3 Air Temperature <strong>and</strong> Relative Humidity<br />
D3.1 Air temperature <strong>and</strong> relative humidity in mechanically cooled occupancies.<br />
D3.2 Air temperature in naturally ventilated occupancies.<br />
D4 Daylighting <strong>and</strong> Illumination<br />
D4.1 Daylighting in primary occupancy areas.<br />
D4.2 N.A.<br />
D4.3 N.A.<br />
D5 Noise <strong>and</strong> Acoustics<br />
D5.1 Noise attenuation through the exterior envelope.<br />
Final Report 176 31 03 2011