PI-VR - VRED Professional 4.2 - PI-VR GmbH

inner Radius - defines the torus inner radius.
outer Radius - defines the torus outer radius.
Sides - defines the amount of side subdivisions.
Rings - defines the amount of ring subdivisions.
Decore - starts a decore process. All geometries which are fully enclosed by other
objects will be deleted.
Connector - Using the connector, VRED instances can be synchronized for navigation on
independent computers.
Connect to - here the connection settings can be entered, when this VRED instance is a
connection-slave
Server - sets the server ip.
Port - sets the communication port address.
Disconnect - deactivates the connector.
connect - activates the connector.
status - displays the current connection-slave status.
Save Settings - connector-slave settings can be stored. Press the Save Settings button.
Close - closes the connector dialog box.
Server - here the connection settings can be entered, when this VRED instance is a connectionserver.
Port - sets the communication port address.
Stop - stops the connection-server.
Start - starts the connection-server.
Status - displays the current connection-server status.
Save Settings - connector-server settings can be stored. Press the Save Settings button.
Close - close the connector dialog box.
Connect to the cluster - starts the rendercluster. Read Rendering ->Cluster for
clustering settings.