PI-VR - VRED Professional 4.2 - PI-VR GmbH

VRED Documentation
You are here: Modules > Material Editor > Materials Tab > TrueLight Materials > Unicolor Paint Material
Unicolor Paint Material
Unicolor Paint Material - creates a Truelight
Unicolor Paint Material. The Unicolor Paint Material
offers a shading model suited for unicolor painted
surfaces.
Base Color - sets the diffuse reflection color of
the Unicolor Paint Material. This is the color the
shader will adopt, when the surfaces is globally
light.
Clearcoat Settings - sets the clearcoat color.
The clearcoat is a transparent, strongly
reflective paint layer on the base paint layer.
Clearcoat Color - sets the clearcoat
color.
Reflectivity - sets the clearcoat
reflective intensity.
Orange Peel - activates a noisy bump
structure in the shader.
Orange Peel Frequency - sets the
bump structure`s noise frequency.
Orange Peel Intensity - sets the
bump structure`s intensity.
Noise Quality - sets the noise quality.
Low - sets the noise quality to
low. Low quality uses less
memory.
High - sets the noise quality to high. This allows even on extreme
close ups sharp and detailed noise structures.
Incandescence Settings - the incandescence defines the shader`s self-illumination behavior.
Incandescence Color - sets the self-illumination color.
Incandescence Intensity - sets the self-illumination intensity.
Use Texture - loads an image texture, which defines the self-illumination area and intensity.
Repeat mode - sets the repeat mode of the texture. There are four modes, which can be set.
Repeat - the texture will be repeated in all directions.
Repeat Mirror - the texture will be repeated and mirrored in x- and y-axis on every
repetition.
Decal - the texture will not be repeated.
Clamp - not the whole texture will be repeated. Only the last pixel of the texture will be
repeated.
Anisotrophy - sets the texture filter quality for the image texture. Value 1 is lowest quality.
Value 16 is highest quality.
Common Settings