PI-VR - VRED Professional 4.2 - PI-VR GmbH

Repeat - the texture will be repeated in all directions.
Repeat Mirror - the texture will be repeated and mirrored in x- and y-axis on
every repetition.
Decal - the texture will not be repeated.
Clamp - not the whole texture will be repeated. Only the last pixel of the texture
will be repeated.
Anisotrophy - sets the texture filter quality for the image texture. 1 is lowest
quality. 16 is highest quality.
Input Gamma - sets the texture image gamma correction.
Specular Texture
Use Texture - loads an image texture for the specular color channel. The image
will be used as a pattern on the surfaces. Read MaterialEditor -> Textures
for texture placement.
Repeat mode - sets the repeat mode of the texture. There are four modes,
which can be set.
Repeat - the texture will be repeated in all directions.
Repeat Mirror - the texture will be repeated and mirrored in x- and y-axis on
every repetition.
Decal - the texture will not be repeated.
Clamp - not the whole texture will be repeated. Only the last pixel of the texture
will be repeated.
Anisotrophy - sets the texture filter quality for the image texture. Value1 is
lowest quality. Value 16 is highest quality.
Input Gamma - sets the texture image gamma correction.
Bump Texture
Use Structure - activates a procedural bump structure.
Use Texture - loads an image texture for the bump channel. The image will be
used as a pattern on the surfaces. Read MaterialEditor -> Textures for
texture placement.
Repeat mode - sets the repeat mode of the texture. There are four modes,
which can be set.
Repeat - the texture will be repeated in all directions.
Repeat Mirror - the texture will be repeated and mirrored in x- and y-axis on
every repetition.
Decal - the texture will not be repeated.
Clamp - not the whole texture will be repeated. Only the last pixel of the texture
will be repeated.
Anisotrophy - sets the texture filter quality for the image texture. Value 1 is
lowest quality. Value 16 is highest quality.
Parallax Intensity - sets the parallax shift interpretation of the bump image
texture.
Bump Intensity - sets the bump intensity interpretation of the bump image
texture.
Structure Size - sets the structure size when the procedural bump structure is
activated.
Bump Type - sets the bump type. In OpenGL mode the bump mapping can be
drawn as bump map or as displacement map. In Raytracing rendering mode only
bump mapping is supported.
Noise Quality - sets the procedural bump structure texture quality.
Incandescence Settings - the incandescence defines the shader`s self-illumination behavior.