FDR V54L78 - Innovation Data Processing

CPK322I
MESSAGES AND CODES
COMPAKTOR MESSAGES (CPKNNNXX) 100.6
COMPAKTOR function ENDED.
COMPAKTOR RECOVERY ENDED - DATA SETS RETURNED TO ORIGINAL LOCATIONS
COMPAKTOR RECOVERY ENDED - REORGANIZATION COMPLETE
Reason: Indicates that COMPAKTOR has completed the operation RECOVERY, RELEASE, or
RESTORE and the volume should be usable. Some cleanup operations (such as
mapping the COMPAKTed volume and rebuilding the VTOC Index) may still remain to
be done, so errors may still occur.
On a RESTORE from an FDR backup tape, if the text SOME BACKUP VOLUMES WERE
NOT REQUIRED appears, this is simply an assurance that you need not be concerned if
COMPAKTOR did not call for all the volumes of the FDR backup; tracks at the end of the
volume did not need to be rewritten, probably because of %FOLD=nn or SIZEKEEP=.
The second form of the message is issued when COMPAKTOR RECOVERY has completed
by backing out all changes and returning all data to its original location on the disk.
The third form of the message is issued when COMPAKTOR RECOVERY was able to complete
the original COMPAKTOR request and has moved all data to its intended location.
CPK403E EXCESSIVE NUMBER OF DATA SET AND/OR DSGROUP NAMES INPUTTED
Reason: Over 255 different names were found on SELECT control statements.
Action: Rerun with fewer SELECT control statements.
CPK404W operand=value IS INVALID. A DEFAULT VALUE MAY BE ASSUMED
Reason: The “value” is invalid for the “operand”.
Action: Check for valid data or numeric data for the keyword, as described in Chapter 40
“COMPAKTOR (CPK)”. If COMPAKTOR ABENDed, fix the invalid variable and rerun,
otherwise check that the assumed default value is acceptable.
CPK405E THE FROMDD= PARAMETER IS INVALID, OR ITS DD CARD IS MISSING, OR IT
DOES NOT SPECIFY A type DEVICE, OR VOL= WAS SPECIFIED
Reason: You specified FROMDD= but:
❖ The value was invalid.
❖ The DDname you specifies does not appear in the COMPAKTOR JCL.
❖ The device type allocated to the DDname is not TAPE or DISK.
❖ VOL= was also coded (you cannot use both).
Action: Correct the error and rerun.
CPK406E INVALID OR INCONSISTENT USE OF KEYWORD -- operand
Reason: The operand “operand” is not valid for the form of the DSNAME statement you used, or
conflicts with a mutually exclusive keyword that was also specified.
Action: Correct the error and rerun.
CPK407E
Reason:
Action:
LAST ’SEQ’ COMMAND SPECIFIED A NULL SET, OR THE ’ENDSEQ’ COMMAND IS
NOT PRECEDED BY A ’SEQ’ COMMAND.
No SELECT control statements were found between a SEQ and an ENDSEQ
statement, or an ENDSEQ control statement is misplaced.
Correct error and rerun.
CPK408E LAST READ CONTROL STATEMENT IS OUT-OF-SEQUENCE.
Reason: A major statement is preceded by one or more minor statements, or a SELECT DSG=
statement precedes a SELECT DSN/SEQ/ENDSEQ statement group.
Action: Correct the error and rerun.
CHAPTER 100 – PAGE 100-126 –