FDR V54L78 - Innovation Data Processing

More documents

Recommendations

Info

CPK322I MESSAGES AND CODES COMPAKTOR MESSAGES (CPKNNNXX) 100.6 COMPAKTOR function ENDED. COMPAKTOR RECOVERY ENDED - DATA SETS RETURNED TO ORIGINAL LOCATIONS COMPAKTOR RECOVERY ENDED - REORGANIZATION COMPLETE Reason: Indicates that COMPAKTOR has completed the operation RECOVERY, RELEASE, or RESTORE and the volume should be usable. Some cleanup operations (such as mapping the COMPAKTed volume and rebuilding the VTOC Index) may still remain to be done, so errors may still occur. On a RESTORE from an FDR backup tape, if the text SOME BACKUP VOLUMES WERE NOT REQUIRED appears, this is simply an assurance that you need not be concerned if COMPAKTOR did not call for all the volumes of the FDR backup; tracks at the end of the volume did not need to be rewritten, probably because of %FOLD=nn or SIZEKEEP=. The second form of the message is issued when COMPAKTOR RECOVERY has completed by backing out all changes and returning all data to its original location on the disk. The third form of the message is issued when COMPAKTOR RECOVERY was able to complete the original COMPAKTOR request and has moved all data to its intended location. CPK403E EXCESSIVE NUMBER OF DATA SET AND/OR DSGROUP NAMES INPUTTED Reason: Over 255 different names were found on SELECT control statements. Action: Rerun with fewer SELECT control statements. CPK404W operand=value IS INVALID. A DEFAULT VALUE MAY BE ASSUMED Reason: The “value” is invalid for the “operand”. Action: Check for valid data or numeric data for the keyword, as described in Chapter 40 “COMPAKTOR (CPK)”. If COMPAKTOR ABENDed, fix the invalid variable and rerun, otherwise check that the assumed default value is acceptable. CPK405E THE FROMDD= PARAMETER IS INVALID, OR ITS DD CARD IS MISSING, OR IT DOES NOT SPECIFY A type DEVICE, OR VOL= WAS SPECIFIED Reason: You specified FROMDD= but: ❖ The value was invalid. ❖ The DDname you specifies does not appear in the COMPAKTOR JCL. ❖ The device type allocated to the DDname is not TAPE or DISK. ❖ VOL= was also coded (you cannot use both). Action: Correct the error and rerun. CPK406E INVALID OR INCONSISTENT USE OF KEYWORD -- operand Reason: The operand “operand” is not valid for the form of the DSNAME statement you used, or conflicts with a mutually exclusive keyword that was also specified. Action: Correct the error and rerun. CPK407E Reason: Action: LAST ’SEQ’ COMMAND SPECIFIED A NULL SET, OR THE ’ENDSEQ’ COMMAND IS NOT PRECEDED BY A ’SEQ’ COMMAND. No SELECT control statements were found between a SEQ and an ENDSEQ statement, or an ENDSEQ control statement is misplaced. Correct error and rerun. CPK408E LAST READ CONTROL STATEMENT IS OUT-OF-SEQUENCE. Reason: A major statement is preceded by one or more minor statements, or a SELECT DSG= statement precedes a SELECT DSN/SEQ/ENDSEQ statement group. Action: Correct the error and rerun. CHAPTER 100 – PAGE 100-126 –
CHAPTER 100 – PAGE 100-127 – MESSAGES AND CODES COMPAKTOR MESSAGES (CPKNNNXX) 100.6 CPK409E A REQUIRED OPERAND IS MISSING. Reason: An operand, either positional or keyword, required by the statement is missing. Action: Correct the error and rerun. CPK410E EITHER ’ENDSEQ’ COMMAND MISSING, OR POS=, DSG OR FILTER REQUESTED WITHIN A SEQUENCE SET. ASSUMING END OF SET Reason: 1.An ENDSEQ statement, delimiting a sequenced set, is missing. 2.A SELECT statement with a POS= or SCRATCH= operand was encountered within the range of a SEQ statement. You cannot code the POS= operand for individual members of a sequenced set. 3.A SELECT DSG= statement was encountered within the range of a SEQ statement. Action: An ENQSEQ statement is assumed before the incorrect statement. If this does not produce the correct results, correct the error and rerun. CPK411E THE FOLLOWING NAME WAS SPECIFIED MORE THAN ONCE -- dsname Reason: The data set name “dsname” was found on two or more SELECT statements. You may specify a particular data set name or data set name group only once. Action: Correct the error and rerun. CPK412W Reason: CPK413E Action: Reason: Action: THE ’RLSE=’ OPERAND WILL NOT BE HONORED WHEN ’POS=KEEP’ IS ALSO SPECIFIED. Specifying POS=KEEP makes data sets unmovable, so their unused tracks cannot be freed. None. This is only a warning message. VTOC POSITIONING/SIZING IS INVALID WHEN ’VTOC=NOCHANGE’ OR %FOLD IS ALSO SPECIFIED. A SELECT ***VTOC statement was input to move and/or resize the VTOC, but VTOC=COMPAKT was not specified on the COMPAKT statement. It is also invalid if %FOLD= is specified. Correct the error and rerun. CPK425E UNABLE TO PROCESS VOL=vvvvvv -- DUMMY VTOC OR CMS VOLUME Reason: COMPAKTOR found that the VTOC on volume “vvvvvv” started and ended on cylinder 0 head 0. This is the form of a dummy VTOC created on volumes formatted for VM. Action: The dummy VTOC does not contain any useful information, so COMPAKTOR bypasses this volume. CPK426E UNABLE TO OPEN DDNAME=dddddddd -- POSSIBLE MISSING DD CARD Reason: COMPAKTOR is unable to open for access the DD statement whose name is “dddddddd”. This usually occurs when the DD statement is missing. Action: Supply the appropriate DD statement and rerun. CPK427E Reason: CPK428E Action: Reason: Action: THE DEVICE TO COMPAKT TO -- UNIT=uuuu, VOLSER=vvvvvv IS NOT SUPPORTED BY COMPAKTOR An unsupported disk device was referenced. See Section 2.10 “FDR Functions and Features” for a list of supported device types. If necessary, contact INNOVATION DATA PROCESSING for technical assistance. THE DEVICE DUMPED TO TAPE ON UNIT=uuuu,VOLSER=vvvvvv IS NOT SUPPORTED BY COMPAKTOR The internal device type code for the disk type on the backup tape is not among those supported. The backup tape may not be a valid FDR backup. Contact INNOVATION DATA PROCESSING for technical assistance.
Page 1 and 2:
MESSAGES AND CODES INTRODUCTION TO
Page 3 and 4:
MESSAGES AND CODES FDR CONSOLE MESS
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
MESSAGES AND CODES MESSAGES FROM FD
Page 19 and 20:
FDR020 Reason: Action: MESSAGES AND
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
MESSAGES AND CODES CHAPTER 100 - PA
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
MESSAGES AND CODES CHAPTER 100 - PA
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76: MESSAGES AND CODES MESSAGES FROM FD
Page 85 and 86: MESSAGES AND CODES CHAPTER 100 - PA
Page 99 and 100: FDR547 Reason: Action: MESSAGES AND
Page 121 and 122: FDR939 Reason: MESSAGES AND CODES T
Page 123 and 124: MESSAGES AND CODES MESSAGES FROM SA
Page 125: 100.6 COMPAKTOR MESSAGES (CPKNNNXX)
Page 129 and 130: MESSAGES AND CODES COMPAKTOR MESSAG
Page 135 and 136: CPK526E MESSAGES AND CODES COMPAKTO
Page 145 and 146: MESSAGES AND CODES FDRREORG MESSAGE
Page 163 and 164: MESSAGES AND CODES ABEND CODES 100.
Page 169 and 170: 100.9 WAIT STATE CODES FROM SAR WAI
show all

FDR V54L78 - Innovation Data Processing

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?