FDR V54L78 - Innovation Data Processing

100.9 WAIT STATE CODES FROM SAR
WAIT STATE
MESSAGES AND CODES
WAIT STATE CODES FROM SAR 100.9
SAR issues wait states indicating an action is required or an error has occurred. Most wait
states are preceded by an explanatory message. The wait state code is the last four digits of
the current PSW. On many CPUs the PSW is automatically displayed on the hardware console
when the “STOP” key is pressed; consult your hardware operating manuals for details.
00E2 MACHINE CHECK
Reason: A machine-check (CPU error) has occurred and SAR is unable to continue.
Action: Display storage location 232 (x'E8') to get the machine check interrupt code, which can
be interpreted using information in the Principles of Operation and/or Reference
Summary for your CPU. Contact your hardware maintenance vendor for assistance.
1111 I/O WAIT AND RETRY PSW
Reason: A normal wait state during I/O operations.
3333 CONSOLE ERROR
Reason: An I/O error has occurred reading or writing from the master console. This is not
preceded by a message.
Action: Re-IPL SAR and retry using a different console.
5555 PROGRAM CHECK
Reason: A program check occurred before SAR identified the console. SAR was not able to issue
a message.
Action: Contact INNOVATION DATA PROCESSING for assistance.
9997 TERMINATE WAIT STATE
Reason: An I/O error or other error has abnormally terminated SAR. An FDR9xx message
detailing the error should have been printed.
9999 EOJ WAIT STATE
Reason: Normal wait state indicating end of job. An FDR99x message should have been printed.
FFFF OPERATOR CONSOLE WAIT STATE
Reason: This wait state indicates that SAR has been successfully loaded. SAR is now waiting for
the interrupt that identifies the device to be used as the console.
CHAPTER 100 – PAGE 100-169 –