FDR V54L78 - Innovation Data Processing

MESSAGES AND CODES
MESSAGES FROM FDR, DSF, AND ABR (FDRNNN) 100.3
Action:
S
S
S
ANTRQST REQUEST BUFFER EXHAUSTED – An error occurred while
invoking the IBM FlashCopy API. Contact INNOVATION DATA
PROCESSING for assistance.
SOURCE VOLUME NOT IN FLASHCOPY STATUS – An error occurred
while invoking the IBM FlashCopy API. Contact INNOVATION DATA
PROCESSING for assistance.
SRC/TGT VOLUMES NOT PAIRED OR IN SIMPLEX STATE – The
FlashCopy source and target volumes are each already paired with a
different volume OR they are not both in Simplex state. FlashCopy cannot
be used on this pair until those FlashCopy sessions are terminated.
S FLASHCOPY – ANTRQST FUNCTION FAILURE – Unknown error
occurred while attempting to issue the ANTRQST function. Check FDR149
message for requested function, return and reason codes.
S FLASHCOPY UNEXPECTED QUERY DATA RETURNED – An error
occurred while invoking the IBM FlashCopy API. Contact IBM to be sure
you have the latest maintenance for FlashCopy and contact INNOVATION
DATA PROCESSING for assistance.
S FLASHCOPY WITHDRAW FUNCTION FAIL CODE=nnnnn-nnnnn
RELEASE BYPASSED – FCOPY=(USE,REL) was specified but the
FlashCopy withdraw (FCWITHDR) failed with the indicated return codes.
T FLASHCOPY VOL(S) ARE IN ACTIVE RELATIONSHIPS – Either the
FlashCopy source or target volume is already paired with a different volume.
FlashCopy cannot be used on this pair until that FlashCopy session is terminated.
T FLASHCOPY ESTABLISH FAILED FOR SOURCE – An attempt to
establish the relationship has failed. Perform FCQUERY on source and
target volumes to determine cause of failure. Review FDR149 for
information on current device status, return and reason codes. Check
source and target compatibility and capacity.
T
T
FLASHCOPY RELEASE FAILURE – An attempt to release the relationship
due to the use of FCOPY=(USE,REL) has failed. Review FDR149 for
information on current device status, return and reason codes. Possibly due
to the use of FCOPY=COPY or an external FCWITHDR being performed.
ANTRQST - PPRC REQUEST FAILURE – An error occurred while invoking
the IBM PPRC API. Contact INNOVATION DATA PROCESSING for assistance.
U SECURITY ACCESS DENIED TO DSN=FDR.USE.UNITxxxx –
FDRINSTANT security checking was enabled, and the user id under which
the FDRINSTANT request was run does not have UPDATE authority to the
data set FDR.USE.UNITxxxx where “xxxx” is the device address of the
offline target volume specified by the xxxxUNIT= operand.
V
W
X
BCVUNIT= IS NOT SPLIT FROM SOURCE DEVICE – WILL SEARCH
UCBS – The device specified by BCVUNIT= was not a BCV split from the
online volume specified by VOL=. FDR searches all offline UCBs for the
proper BCV; if found, the operation continues; if not found, another
message is issued and the operation fails.
VOL1 RESERVED FIELDS NOT BLANK – FDRINSTANT stores information
in reserved fields in the volume label of the offline volume. This is a warning that
those fields were not blanks, as expected, but ABR overlaid them anyway.
EMCQCAPI ERROR RC=rrrrrrrr ACTION=aa IORC=iiii – An error occurred
invoking the EMC SNAP API. Error codes are displayed. If the API returned a text
explanation of the error, a second line with MSG= is displayed. One common cause
is that the EMCSCF address space is not active.
In most cases, the volume is bypassed. In the case of FDRCOPY, it may use standard
read/write I/O if an instant replication facility cannot be used. If additional MOUNT
statements were specified, additional volumes are processed.
CHAPTER 100 – PAGE 100-52 –