Expert Documentation

TRANSP: by successively pressing this key, you can authorize or inhibit joining by transfer
(transfer ext -ext).
DIVERT: by successively pressing this key, you can define the type of external forwarding:
Joining or Rerouting.
11.2.4.1.11DIRECTORY - NAME
NAME
makes it possible to display all the names corresponding to a given number in the
numbering plan, with the possibility of modifying these names.
MODIFY and ADD make it possible to modify/add a name; enter the user name (16 characters
maximum) as "surname-space-first name" using the alphabetic keypad or the station's dialing
keypad which will have automatically switched to "letters" mode.
11.2.4.1.12DOWNLOADING - DOWNLD
Press DOWNLD .
SWAP makes it possible to configure the date, time and mode of the software swap:
DATE: swap date
TIME: swap time
MODE: swap mode; by pressing successively on CHOICE, define the swap operating mode:
- normal with data saving
- normal without data saving
- forced with data saving (no restoration of the old version in the case of a transfer failure).
SWVERS makes it possible to read the software references of the CPU board:
CURRENT: current CPU software reference
OTHER: new CPU software reference
11.2.4.1.13FAX NOTIFICATION TABLE - FAXTAB
This 30-entry table defines the relationships between the user numbers to be notified by a
message in an incoming fax which is intended for them and the number of the receiving fax
machine.
Press FAXTAB .
RESUBS makes it possible to define the number of the set to call (sending a message saying
that a fax has arrived).
FAXNUM makes it possible to define the number of the fax machine concerned.
11.2.4.1.14DTMF END-TO-END SIGNALING - MFTRAN
Press MFTRAN .
CHOICE: by successively pressing this key, you can define whether the DTMF end-to-end
signaling is applied overall for all users, for no user or whether the passage in DTMF
end-to-end signaling is carried out individually for the sets.
11-49