Expert Documentation

Chapter 3
3.59.1.1 DESCRIPTION
Customization only affects the station on which it is performed (you cannot customize remote
stations).
3.59.1.1.1 Switching to Customization mode
Depending on the type of station, press Custo (2nd page, Advanced Station in Idle) or i + 5, or
dial the "Programming Mode" function code.
The following pages describe the tree structures available for each type of station; navigation
is done using soft keys or codes (with the help of voice guides).
3.59.1.1.2 Additional Information
- Answer Only: activating or deactivating mode does not modify the greeting in the voice
mailbox ; the user has to select the appropriate default message or rerecord a new one
that corresponds to the selected mode of operation.
- Destination number (personal assistant or message notification):
• external numbers must include the network access prefix
• external numbers are subject to restriction controls
• if the pre-defined number is invalid or restricted, the call is automatically put through to
the destination mailbox (personal assistant) or is not connected (remote notification).
- Time ranges: on initialization, the start time is 00:00 and the end time is 24:00
- Customization validation key: OK for stations with soft keys, # for stations without soft
keys, 9 for rotary dialing stations.
3.59.1.1.3 Other available features:
- i key + key programmed with a specific parameter: modify the parameter value.
- Directory key + i key: program personal speed dials.
- i key + Appmnt key: program a reminder call.
- i key + Divert key: program call types to be forwarded.
Note:
For a detailed description of how to set up these features (passing from one feature to another, deleting a
value, etc), refer to the user guide for the relevant terminal.
3.59.1.1.4 Stations with soft keys
3-162