Expert Documentation

More documents

Recommendations

Info

Chapter 1 - 96 ports - 1 CPU slot + 4 general-purpose slots + 4 specific slots (no UAI16 and MIX boards) - Power consumption: 1.2 A (230 V) / 2.3 A (110 V) -150 W. - Dimensions: H = 154 mm (6.1 inches); W = 442 mm (17.4 inches); D = 400 mm (15.76 inches). - Weight: 13 kg. Maximum capacity: The system can be extended by adding one or two platforms to the main platform. All combinations are possible, with a maximum of 3 platforms. The maximum capacity is 236 stations. 1-4
1.2.3.4 OmniPCX Office RCE Compact - 12 ports. - 1 CPU slot + 1 MIX slot - Power consumption: 1.5 A (240 V) - Dimensions: H = 345 mm; W = 370 mm; D = 65 mm. - Weight: 5.1 kg. The following mixed boards are available: - MIX 244 - MIX 284 - MIX 248 - MIX 448 - MIX 484 - AMIX 444-1 - AMIX 484-1 - AMIX 448-1 The Mini-MIX daughter board, which is plugged on a PowerCPU board for call handling, provides 2 Z accesses and 2 T0 accesses. Note: The Mini-MIX daughter board requires BACKXS-N back panel and PSXS-N power supply module. The Mini-MIX daughter board can be used only in an OmniPCX Office RCE Compact or, in case of migration from R7.1 or lower, in a Compact Edition 2nd Generation, equipped with a PowerCPU board. The PowerCPU board shows a Mini-MIX led. This LED is steady when the Mini-MIX daughter board is detected on the PowerCPU board. 1.2.4 Subsets Compatibility 1-5
Page 1 and 2: Expert Documentation Release 9.1 -
Page 3 and 4: Chapter 1 General Presentation Cla
Page 5 and 6: V24/CTI Interface Module ..........
Page 7 and 8: Configuration procedure ...........
Page 9 and 10: Configuration procedure ...........
Page 11 and 12: Overview ..........................
Page 13 and 14: General Presentation ..............
Page 17 and 18: Chapter 8 General Applications PIM
Page 21 and 22: DECT ..............................
Page 23 and 24: B .................................
Page 25 and 26: 1.1 Clauses 1.1.1 Clauses Copyright
Page 27: • The Alcatel-Lucent OmniPCX Offi
Page 31 and 32: Board Function Optional boards Conn
Page 33 and 34: Type of module Primary T1 + T2 + DL
Page 35 and 36: Type of module TAPI 2.1 servermonit
Page 37 and 38: BOARDS SLOTS 1-2 CPU SLOT PowerCPU
Page 39 and 40: BOARDS MIX SLOT CPU SLOT PowerCPU N
Page 41 and 42: BOARDS AND TERMINALS OmniPCX Office
Page 43 and 44: Essential Requirements Directive 19
Page 45 and 46: Essential Requirements Directive 19
Page 47 and 48: Interface Specifications ETSI Stand
Page 49 and 50: Product OmniPCX Office RCE Compact
Page 51 and 52: Product DECT/WLAN Handsets Product
Page 53 and 54: Product DECT Outdoor Radio Base Pro
Page 55 and 56: ytes (which is the limit in the exi
Page 57 and 58: - Relative humidity: relative humid
Page 59 and 60: 2.1 C, S, M, L Racks 2.1.1 Hardware
Page 61 and 62: 2.2 Boards 2.2.1 POWER CPU 2.2.1.1
Page 63 and 64: Name Color Function Figure 2.5: Pow
Page 65 and 66: Available functions:: - LAN: 10/100
Page 67 and 68: Audio Input Characteristics: Input
Page 69 and 70: 2.2.1.3.8 Connecting a Doorphone 2
Page 71 and 72: The PowerMEX board (POWER Module EX
Page 73 and 74: 2.2.3.2 External connections 2.2.3.
Page 75 and 76: Connections The ISDN-EFM box must b
Page 77 and 78: 2.2.4.2 Hardware configuration 2.2.
Page 79 and 80:
RJ45 pin 1 2 3 4 5 6 7 8 NETW outpu
Page 81 and 82:
RJ45 pin 1 2 3 4 5 6 7 8 Outputs 1
Page 83 and 84:
- MIX044: 4 UA interfaces and 4 Z i
Page 85 and 86:
2.2.8.1 Basic description The Mini-
Page 87 and 88:
2.2.9 AMIX-1 Figure 2.39: Mini-MIX
Page 89 and 90:
RJ45 pin 1 2 3 4 5 6 7 8 AT outputs
Page 91 and 92:
RJ45 pin 1 2 3 4 5 6 7 8 Outputs L1
Page 93 and 94:
RJ45 pin 1 2 3 4 5 6 7 8 Outputs 1
Page 95 and 96:
2.2.11.2 External connections 2.2.1
Page 97 and 98:
2.2.12.1.1 LANX-2 boards The LanX8-
Page 99 and 100:
Each category-5 RJ45 connector has
Page 101 and 102:
Basic 10/100 BT connection MDI-X to
Page 103 and 104:
RJ45 pin 1 2 3 4 5 6 7 8 Output1 ZS
Page 105 and 106:
2.2.14.2 External connections 2.2.1
Page 107 and 108:
2.2.15.1.2 Power Supply PS2/PS2N Po
Page 109 and 110:
2.2.15.1.4 Batteries Equipment: - O
Page 111 and 112:
Equipment The following table indic
Page 113 and 114:
_dne-egnahc_ 2.3.1.1.2 Equipme
Page 115 and 116:
_nigeb-egnahc_ _dne-egnahc_ Ke
Page 117 and 118:
• In dynamic mode, a DHCP server
Page 119 and 120:
The DHCP offer provides the followi
Page 121 and 122:
Displayed Status Set not connected
Page 123 and 124:
- Other SIP phones with video capab
Page 125 and 126:
Figure 2.88: 8082 My IC Phone Scree
Page 127 and 128:
- Wide view field - Omni-directiona
Page 129 and 130:
2.3.2.3.2 Commissioning the set Fig
Page 131 and 132:
- Initialize the 8082 My IC Phone s
Page 133 and 134:
• Enable and configure a DHCP Use
Page 135 and 136:
Displaying SIP Connection Current S
Page 137 and 138:
The Video Support feature right is
Page 139 and 140:
Figure 2.96: 4135 IP Conference Pho
Page 141 and 142:
Figure 2.100: 4135 IP Conference Ph
Page 143 and 144:
To connect the set to the LAN: 1. T
Page 145 and 146:
• The Files of type field indicat
Page 147 and 148:
3. Select IP terminal and enter a N
Page 149 and 150:
2. Read the SIP connection status (
Page 151 and 152:
- Set features - Set keyboard - Set
Page 153 and 154:
Key Action Mute (with green LED) -
Page 155 and 156:
Figure 2.102: Alcatel-Lucent IP Tou
Page 157 and 158:
You do not use a DHCP server Static
Page 159 and 160:
In the procedure below, it is assum
Page 161 and 162:
auto-negotiation, this is the best
Page 163 and 164:
2.3.6.1.2 Instant Business Communic
Page 165 and 166:
Set features Figure 2.103: Alcatel-
Page 167 and 168:
Key Hands-free (with green LED) Vol
Page 169 and 170:
Edition), unless specifically indic
Page 171 and 172:
You do not use a DHCP server Static
Page 173 and 174:
- AOM Alcatel-Lucent 8 series and A
Page 175 and 176:
2. Select Name and enter the name t
Page 177 and 178:
Connecting the Battery Figure 2.105
Page 179 and 180:
2.3.6.6 Maintenance 2.3.6.6.1 Overv
Page 181 and 182:
Terminal Port External Device Port
Page 183 and 184:
Figure 2.106: Alcatel-Lucent 4019 D
Page 185 and 186:
Key Help/Menu Action Menu - Press o
Page 187 and 188:
Connecting the set to the telephone
Page 189 and 190:
- Set features - Set keyboard - Set
Page 191 and 192:
Key Hands-free (with green LED) Vol
Page 193 and 194:
Figure 2.109: Alcatel-Lucent 4029 D
Page 195 and 196:
The 3.5 mm female jack can receive
Page 197 and 198:
For the input methods of Pinyin, St
Page 199 and 200:
Figure 2.112: Change input method I
Page 201 and 202:
Figure 2.116: Configure a phone nam
Page 203 and 204:
terminal to be updated. - Downloads
Page 205 and 206:
- ISO 14040: Environmental manageme
Page 207 and 208:
Figure 2.119: Example of Configurat
Page 209 and 210:
The Option 4099 (Multiple UA Hub) s
Page 211 and 212:
2.3.15 Base Stations 2.3.15.1 Hardw
Page 213 and 214:
Master link not connected, local po
Page 215 and 216:
Relative Humidity 5 - 95 % PoE Spec
Page 217 and 218:
are available in 2 models: a. Mobil
Page 219 and 220:
Figure 2.128: Alcatel-Lucent 300 DE
Page 221 and 222:
The following table lists handset k
Page 223 and 224:
directions) and confirmation. You c
Page 225 and 226:
This set provides: Figure 2.130: 50
Page 227 and 228:
KEY USE Allows to: - Switch the set
Page 229 and 230:
2.3.18.1.2 Key benefits Figure 2.13
Page 231 and 232:
- DECT - Frequency range: • DECT
Page 233 and 234:
• EN 300 175-8 (DECT audio) • E
Page 235 and 236:
The Braille keyboard, in the center
Page 237 and 238:
OPTIONAL MODULES (PLUGWARE) The opt
Page 239 and 240:
4094 ISW module This module connect
Page 241 and 242:
Numerical keypad keys 12 12 12 12 1
Page 243 and 244:
Handset YES YES YES YES YES Loudspe
Page 245 and 246:
The maximum length of the ADB link
Page 247 and 248:
Numeric keypad keys 12 12 12 12 Lin
Page 249 and 250:
On/Off Key YES Display: 2 x 16 alph
Page 251 and 252:
3.1 Meet Me Conference 3.1.1 Basic
Page 253 and 254:
The values in "Start" and "End" wit
Page 255 and 256:
3.1.1.1.6 Restrictions In OmniPCX O
Page 257 and 258:
• by OMC (Expert View): Users/Bas
Page 259 and 260:
Page Key Operator Secretary Manager
Page 261 and 262:
Page Key Operator Secretary Manager
Page 263 and 264:
3.2.2.2.1 Key System Mode Same as A
Page 265 and 266:
- The maximum number of trunk group
Page 267 and 268:
- To authorize immediate group forw
Page 269 and 270:
Function keys Normal/Restricted mod
Page 271 and 272:
System Miscellaneous -> Feature Des
Page 273 and 274:
...depending on the mode, normal or
Page 275 and 276:
COS restriction (barring) makes it
Page 277 and 278:
The system uses the end of dialing
Page 279 and 280:
• if the splitting is PAUSE, dial
Page 281 and 282:
- internal callback - call from an
Page 283 and 284:
• by OMC (Expert View): VMU as Au
Page 285 and 286:
3.11 Time ranges 3.11.1 Overview Pr
Page 287 and 288:
3.12.1.1 Description System's opera
Page 289 and 290:
- by OMC (Expert View): Numbering -
Page 291 and 292:
3.14.2.1 Configuration - Define the
Page 293 and 294:
- An external call on an analog lin
Page 295 and 296:
Tree diagram operational after the
Page 297 and 298:
DID numbers can: - contain up to 8
Page 299 and 300:
• for the 2nd sequence: substitut
Page 301 and 302:
CW Call Waiting NO HOLD NO YES MCID
Page 303 and 304:
Group broadcast * 01 to *08 * 01 to
Page 305 and 306:
when making an outgoing ISDN (or VO
Page 307 and 308:
3.20.1.2.4 Interactions When severa
Page 309 and 310:
Alternative CLIP/COLP Number Enter
Page 311 and 312:
party's voice mailbox if the line i
Page 313 and 314:
- A CCBS callback cannot be interce
Page 315 and 316:
handling of fax detection. 3.24.2 C
Page 317 and 318:
Note: If the service is not active
Page 319 and 320:
3.26.1 Overview 3.26.1.1 Descriptio
Page 321 and 322:
- auto-answer or Intercom (on a set
Page 323 and 324:
System Miscellaneous -> Feature Des
Page 325 and 326:
Analog (Z) Intercom mode -- -- With
Page 327 and 328:
_nigeb-egnahc_ 3.27.1.1 Overview
Page 329 and 330:
server. The keep-alive feature is e
Page 331 and 332:
3.28.1.1 DESCRIPTION A user is auto
Page 333 and 334:
Barge-in Feature code P.K.: Barge-i
Page 335 and 336:
Consultation of campedon caller ide
Page 337 and 338:
• the call is returned to the gen
Page 339 and 340:
Consultation call (enquiry) (Europe
Page 341 and 342:
P.K.: Programmed Key - defined by O
Page 343 and 344:
it possible to activate or cancel t
Page 345 and 346:
Type of forwarding Follow-me Prefix
Page 347 and 348:
3.33.2.1 CONFIGURATION - To specify
Page 349 and 350:
Note: • when DTMF end-to-end sign
Page 351 and 352:
- a call arriving at the general le
Page 353 and 354:
Parking of an external party Parked
Page 355 and 356:
Paging by prefix, mode 4 Paging by
Page 357 and 358:
Starting with version R2.0 of the s
Page 359 and 360:
- Calls from external Z users to st
Page 361 and 362:
The keypad dialing features offer a
Page 363 and 364:
• by DHM-OMC (Expert View): Syste
Page 365 and 366:
• by OMC: System Miscellaneous ->
Page 367 and 368:
The system can be used to program 3
Page 369 and 370:
Attendant forwarding Depending on a
Page 371 and 372:
The external destination is called
Page 373 and 374:
3.46 Multi-sets 3.46.1 Overview 3.4
Page 375 and 376:
Note the following restrictions in
Page 377 and 378:
Feature rights Dynamic routing Pers
Page 379 and 380:
Pick-up group Broadcast group Redia
Page 381 and 382:
BUSY2 PRIMARY: no ring SECONDARY: n
Page 383 and 384:
• by OMC Users/Base stations List
Page 385 and 386:
- by OMC Users/Base stations List -
Page 387 and 388:
Page 389 and 390:
The transfer can be performed on th
Page 391 and 392:
• pressing the UPK corresponding
Page 393 and 394:
On all phones, the "Transfer to VMU
Page 395 and 396:
When the SMS transparency feature i
Page 397 and 398:
This configuration is performed usi
Page 399 and 400:
- The "Remote Forwarding" feature u
Page 401 and 402:
destination station and the lines t
Page 403 and 404:
3.53.3.2 CANCELLATION All stations
Page 405 and 406:
- XX-XX = trunk group number used i
Page 407 and 408:
- To activate headset mode (MMC-Sta
Page 409 and 410:
3.57.3 Operation 3.57.3.1 ACTIVATIO
Page 411 and 412:
Analog (Z) Supervised call ringing
Page 413 and 414:
3.59.1.1.5 Stations without soft ke
Page 415 and 416:
3.59.1.1.7 Analog Z stations
Page 417 and 418:
Teamwork simplifies the call manage
Page 419 and 420:
- To create the code for activating
Page 421 and 422:
- The service is refused if the ben
Page 423 and 424:
Page 425 and 426:
- The calling party CLI (Calling Li
Page 427 and 428:
Details of the access algorithm Fig
Page 429 and 430:
- To deactivate fax notification on
Page 431 and 432:
If the calling party picks up the c
Page 433 and 434:
Figure 3.44: Scenario 3.67.2 Detail
Page 435 and 436:
Figure 3.45: Scenario Internal user
Page 437 and 438:
OCD class City/Area call National C
Page 439 and 440:
- Click this icon to modify the Nom
Page 441 and 442:
• All Calls: When validated, all
Page 443 and 444:
_nigeb-egnahc_ _dne-egnahc_ 3.71
Page 445 and 446:
_nigeb-egnahc_ _dne-egnahc_ - Alc
Page 447 and 448:
3.72 List of services provided 3.72
Page 449 and 450:
4008, 4018 4019 4028, 4029 4038, 40
Page 451 and 452:
Auto-answer mode (intercom mode) Au
Page 453 and 454:
First Easy Premium Advanced Analog
Page 455 and 456:
500 DECT Conference Callback Name D
Page 457 and 458:
Callback (4) 8002/801 2 Deskph one
Page 459 and 460:
ISDN (4) Personal Speed Dial (4) Se
Page 461 and 462:
Wake up (4) PIMphony/OTS supervisio
Page 463 and 464:
4.1 General Presentation 4.1.1 Over
Page 465 and 466:
- VMU ports: 2 ports are provided f
Page 467 and 468:
- Association of a mailbox to a giv
Page 469 and 470:
4.2.1 Accessing VMU/the attendant 4
Page 471 and 472:
Only the menus of the main language
Page 473 and 474:
• By OMC (Expert View): Voice Pro
Page 475 and 476:
"Press Star" question are skipped a
Page 477 and 478:
By MMC-OMC (Expert View): Voice Pro
Page 479 and 480:
- Avoid the use of simple passwords
Page 481 and 482:
• By OMC (Expert View): Users/Bas
Page 483 and 484:
4.2.6 Distribution list 4.2.6.1 Ove
Page 485 and 486:
- Number of messages left by caller
Page 487 and 488:
• By MMC-OMC (Expert View): Voice
Page 489 and 490:
sent as an attachment in the form o
Page 491 and 492:
4.3.5.1 Detailed description 4.3.5.
Page 493 and 494:
- To activate remote notification o
Page 495 and 496:
- the caller is informed that the p
Page 497 and 498:
4.3.12.1.4 Stations without soft ke
Page 499 and 500:
4.3.12.1.6 Analog Z stations
Page 501 and 502:
configure some items in their mailb
Page 503 and 504:
- Avoid the use of simple passwords
Page 505 and 506:
When the maximum number of attempts
Page 507 and 508:
3. Click OK. The remote access is u
Page 509 and 510:
The user workstation consists of: -
Page 511 and 512:
protocol, can be utilized in place
Page 513 and 514:
By MMC-OMC (Expert View): Subscribe
Page 515 and 516:
5.1 DECT 5.1.1 DECT Overview 5.1.1.
Page 517 and 518:
The coverage radius of a DECT radio
Page 519 and 520:
Country or zone of registration Cor
Page 521 and 522:
Country or zone of registration Cor
Page 523 and 524:
The rules for calculating the numbe
Page 525 and 526:
Technical Classification of the Sit
Page 527 and 528:
Case of a Full DECT optimization of
Page 529 and 530:
• Confirm the number of zones •
Page 531 and 532:
of installation for China and South
Page 533 and 534:
For some traffic extension or local
Page 535 and 536:
- the complexity of the coverage fo
Page 537 and 538:
Note 3: Directive antennas for the
Page 539 and 540:
NTP_WLAN network 10 dBm: NTP_WLAN n
Page 541 and 542:
Characteristics: for an IBS connect
Page 543 and 544:
APPENDIX 3 : Criteria for Central P
Page 545 and 546:
Once this has been done, slide the
Page 547 and 548:
Attaching a 4070 EO Base Station Wa
Page 549 and 550:
Remark 1: screws to be used: Ø3.5
Page 551 and 552:
Internal Power Supply - The power o
Page 553 and 554:
It is structured as follows: - the
Page 555 and 556:
system restart and plug in the IBSs
Page 557 and 558:
Figure 5.21: PWT Frequencies 5.1.3
Page 559 and 560:
Only the 4080 IP-DECT AP300 is supp
Page 561 and 562:
As this information is confidential
Page 563 and 564:
The DAPs configuration file is then
Page 565 and 566:
Note: The DECT registration period
Page 567 and 568:
4. Enter the current OMC session pa
Page 569 and 570:
Save Enter the phone number assigne
Page 571 and 572:
Note 1: You are advised not to sele
Page 573 and 574:
5.1.6.3 Services provided 5.1.6.3.1
Page 575 and 576:
5.1.6.5.1 Activating radio test mod
Page 577 and 578:
In practice, you have to select thi
Page 579 and 580:
- Operating and programming limits
Page 581 and 582:
5.1.9 DECT Traffic All counters are
Page 583 and 584:
For the minimum length of the memor
Page 585 and 586:
Example: How to read the handset co
Page 587 and 588:
The Mobicall server intereracts wit
Page 589 and 590:
Norm. 1 Norm. 1 1 Rest. 1 Rest. 1 1
Page 591 and 592:
When a SIP trunk group is used, the
Page 593 and 594:
Auth. code ID Tone/Pause Select Non
Page 595 and 596:
The software client can be either:
Page 597 and 598:
Remark: Analog lines also can be us
Page 599 and 600:
- Basic configuration: the local us
Page 601 and 602:
any fallback mode or business servi
Page 603 and 604:
_nigeb-egnahc_ _dne-egnahc_ _nigeb-
Page 605 and 606:
The My IC Mobile for iPhone does no
Page 607 and 608:
- Voice mail services: • Consult
Page 609 and 610:
The Business Call Log contains call
Page 611 and 612:
_dne-egnahc_ _nigeb-egnahc_ Figure
Page 613 and 614:
_nigeb-egnahc_ _dne-egnahc_ _nigeb-
Page 615 and 616:
transmitting at lower data rates re
Page 617 and 618:
_nigeb-egnahc_ _dne-egnahc_ highes
Page 619 and 620:
_dne-egnahc_ 5.3.4.4 General recom
Page 621 and 622:
OmniPCX Office - OmniPCX Office Web
Page 623 and 624:
_nigeb-egnahc_ _dne-egnahc_ - Pack
Page 625 and 626:
To use My IC Mobile for iPhone appl
Page 627 and 628:
- Unified - Phone - Messaging - Col
Page 629 and 630:
- The enterprise WiFi network withi
Page 631 and 632:
5.4.3.1 Main Features The Alcatel-L
Page 633 and 634:
In some cases, phone numbers for ou
Page 635 and 636:
HTC sensation OK OK 5.4.4 Configura
Page 637 and 638:
colon) and the path to the root URL
Page 639 and 640:
prompted to enter a password before
Page 641 and 642:
different call logs, one for each s
Page 643 and 644:
Figure 5.55: Handset with nomadic a
Page 645 and 646:
Figure 5.59: 8002/8012 Deskphone/80
Page 647 and 648:
6.1 General Presentation 6.1.1 Serv
Page 649 and 650:
6.1.1.1.4 Direct RTP The direct RTP
Page 651 and 652:
The connection between the Home wor
Page 653 and 654:
Modulation) at a sampling rate of 8
Page 655 and 656:
In this configuration, the gatekeep
Page 657 and 658:
H.450.7: Camped-on call signaling H
Page 659 and 660:
Note: See also the Home Worker and
Page 661 and 662:
6.3.5.1 Configuration examples 6.3.
Page 663 and 664:
Bandwidth 64 Kbps 2 128 Kbps 5 256
Page 665 and 666:
Network 6.3.5.1.7 Break In List. Tr
Page 667 and 668:
6.3.5.2.2 CLI authentication For mo
Page 669 and 670:
To unlock the remote access to the
Page 671 and 672:
When the remote access is locked, t
Page 673 and 674:
The main types of requests (which i
Page 675 and 676:
Figure 6.12: Example of a dialog Th
Page 677 and 678:
v=0 o=default 1149510698 1149510698
Page 679 and 680:
m a Media description - image: medi
Page 681 and 682:
to perform a DNS A query (or AAAA f
Page 683 and 684:
Figure 6.16: SIP Trunking Topology
Page 685 and 686:
Feature Transfer (consultation, rin
Page 687 and 688:
Feature Standard Used Connected Ide
Page 689 and 690:
1300 bytes and the path MTU is unkn
Page 691 and 692:
DNS Cache Figure 6.19: Process for
Page 693 and 694:
By default, Number of Retries = 6,
Page 695 and 696:
6.4.2.3.9 Safety Incoming Calls The
Page 697 and 698:
Alternative CLIP/COLP Numbers There
Page 699 and 700:
Format (Incoming)) type. If all rec
Page 701 and 702:
Called Format (Incoming) Format or
Page 703 and 704:
end implied. The COLP feature, Conn
Page 705 and 706:
eception - None: no DTMF By default
Page 707 and 708:
2. The called party answers with on
Page 709 and 710:
Default Audio (G722, G711), Video A
Page 711 and 712:
G.722 codec, without the need for a
Page 713 and 714:
Figure 6.22: Update Method Example
Page 715 and 716:
To enable fax over G.711 for a SIP
Page 717 and 718:
2. Review/modify the followings att
Page 719 and 720:
The figure: ARS Configuration with
Page 721 and 722:
Registration requested Public DDI R
Page 723 and 724:
Fax Select the fax protocol: • T3
Page 725 and 726:
Registrar IP Address Port Outbound
Page 727 and 728:
PrefCodec = 0 PrefFraming = 0 PrefC
Page 729 and 730:
message from the Alcatel-Lucent Omn
Page 731 and 732:
Name NAT Keep Alive Position (byte)
Page 733 and 734:
This parameter allows the IP-PBX to
Page 735 and 736:
Name Position (byte) Length (byte)
Page 737 and 738:
As of R9.1, this parameter allows t
Page 739 and 740:
The bandwidth of an Ethernet LAN ca
Page 741 and 742:
6.4.3.3.1 Authentication and Regist
Page 743 and 744:
channels, i.e.48 "IP" B-channels. N
Page 745 and 746:
and CLIR features are then played a
Page 747 and 748:
emote gateway: • Alive: remote ga
Page 749 and 750:
Function Start End Base NMT Priv Ma
Page 751 and 752:
- Increased performance through tra
Page 753 and 754:
The IP/LAN Configuration property s
Page 755 and 756:
6.6.3.1.4 Priority Mapping This pag
Page 757 and 758:
The "Service Type" column displays
Page 759 and 760:
The direct RTP feature enables dire
Page 761 and 762:
- 48 with ARMADA VoIP32 daughter bo
Page 763 and 764:
- 48 with ARMADA VoIP32 daughter bo
Page 765 and 766:
Data rate (bandwidth) Number of pos
Page 767 and 768:
- Automatic overflow: too much traf
Page 769 and 770:
7.1 General Presentation 7.1.1 Over
Page 771 and 772:
another analog trunk; in this case,
Page 773 and 774:
7.1.2 Services provided OPTIMIZED F
Page 775 and 776:
- manually by the attendant (joinin
Page 777 and 778:
- automatically - manually (for exa
Page 779 and 780:
To redirect the call to the central
Page 781 and 782:
SITUATION Call handling The table b
Page 783 and 784:
During an outgoing call, the ISVPN
Page 785 and 786:
• without specific line seizure
Page 787 and 788:
• by OMC (Expert View), select: D
Page 789 and 790:
Use of default values in the "Calle
Page 791 and 792:
Start End Day group Provider/ Desti
Page 793 and 794:
36123 dialed -> selection of the fi
Page 795 and 796:
Pub 8840721 100 - 200 1 1 "Trunk gr
Page 797 and 798:
"Dialing plan" configuration: - "Se
Page 799 and 800:
Network Prefix Ranges Substitute Tr
Page 801 and 802:
Main numbering plan of PCX B Start
Page 803 and 804:
Outgoing calls Called party number
Page 805 and 806:
For all incoming and outgoing calls
Page 807 and 808:
Information transmitted: - Charged
Page 809 and 810:
Note: A "Non synchronising" access
Page 811 and 812:
etween B and A via the QSIG link. S
Page 813 and 814:
- Synchronization priority: 10 - B-
Page 815 and 816:
7.6.1.4 Synchronizing the OmniPCX O
Page 817 and 818:
embedded softphone. An Internet use
Page 819 and 820:
7.6.3.1.3 Configuring the SIP Param
Page 821 and 822:
for the trunks group: System -> Ext
Page 823 and 824:
Login Password Domain name Realm RF
Page 825 and 826:
7.6.4.2 Configuring the Extended Co
Page 827 and 828:
Maximum number of external users En
Page 829 and 830:
8.1 PIMphony 8.1.1 Overview Alcatel
Page 831 and 832:
OS 8.1.3.3 Limits PIMphony PIMphony
Page 833 and 834:
8.2.1.1.2 HOTEL INSTALLATION When t
Page 835 and 836:
Account code with substitution Serv
Page 837 and 838:
DND override This service enables a
Page 839 and 840:
• by MMC-Station: NumPln -> IntNu
Page 841 and 842:
In the case of a wake-up problem, t
Page 843 and 844:
The Hotel application allows you to
Page 845 and 846:
Note: By OMC, under System Miscella
Page 847 and 848:
- validate all the check-in screens
Page 849 and 850:
- the guest's mail status (messages
Page 851 and 852:
- no message is waiting for the gue
Page 853 and 854:
This feature enables a guest to set
Page 855 and 856:
The RSL key or directory no. allows
Page 857 and 858:
3. When finished, click OK. Note: 8
Page 859 and 860:
Automatic forwarding Conference Tra
Page 861 and 862:
• By OMC (Expert View), select: C
Page 863 and 864:
- Terminal forwarding or external f
Page 865 and 866:
- 2 line counters: • one partial
Page 867 and 868:
Note 6: Available for V24 printing
Page 869 and 870:
- Select printing of a header on ea
Page 871 and 872:
FIELD ADD. SERVICES EXTERNAL COR- R
Page 873 and 874:
External forwarding The operator is
Page 875 and 876:
The schema definition of an XML tic
Page 877 and 878:
- cost of counter reminder. If the
Page 879 and 880:
8.4.13 Appendix and the installatio
Page 881 and 882:
Outgoing call: the outgoing call is
Page 883 and 884:
Loopback mode This field defines th
Page 885 and 886:
extracted via the Open Telephony Se
Page 887 and 888:
- Use the MS Windows Add/Remove Pro
Page 889 and 890:
configuration program. 8.5.2.3.2 "L
Page 891 and 892:
The CSTA processing capacities of t
Page 893 and 894:
8.6.2.1.6 Conference Call The Confe
Page 895 and 896:
8.6.2.1.12 Monitor Start The Monito
Page 897 and 898:
The Get Name service returns the na
Page 899 and 900:
8.6.4.2 TAPI SERVER/CLIENT CONNECTI
Page 901 and 902:
8.6.5.2 Configuration - To create v
Page 903 and 904:
• Supervision keys By OMC (Expert
Page 905 and 906:
8.7.3 Using a NPTT Doorphone 8.7.3.
Page 907 and 908:
By OMC (Expert View), select: Subsc
Page 909 and 910:
Select the Network Management Contr
Page 911 and 912:
The recommended procedure is the fo
Page 913 and 914:
- For fixed TEI, assign a value bet
Page 915 and 916:
8.10.1.3 INTERNAL PLLs The system m
Page 917 and 918:
- Management of audio files using O
Page 919 and 920:
8.12.1.2 Topology - The attendant i
Page 921 and 922:
Automatic Welcome - Configuration p
Page 923 and 924:
8.13.1.3.2 Supported OS list for PC
Page 925 and 926:
Internet Explorer Mozilla Firefox S
Page 927 and 928:
9.1 Overview Web-Based Tool is a mo
Page 929 and 930:
Dump System Service Details Operato
Page 931 and 932:
- Enter the audio file name in the
Page 933 and 934:
9.1.3.2 Hardware Information The Ha
Page 935 and 936:
- Disk SMART - System Files - Netwo
Page 937 and 938:
9.1.3.4.2 Memory info The Memory In
Page 939 and 940:
- NMC: is the Alcatel-Lucent Networ
Page 941 and 942:
9.1.4.1.4 Traceroute The Traceroute
Page 943 and 944:
9.1.4.3 NTP status The NTP status l
Page 945 and 946:
The name of the DAP log file link i
Page 947 and 948:
9.1.5 VoIP Information The VoIP lin
Page 949 and 950:
The maximum number of 'hold reserva
Page 951 and 952:
- Delay (in ms): delay between the
Page 953 and 954:
10.1 General Presentation 10.1.1 Ov
Page 955 and 956:
- Alcatel-Lucent OmniTouch 8118/812
Page 957 and 958:
Figure 10.2: Call flows *Callers ca
Page 959 and 960:
This configuration uses a local are
Page 961 and 962:
Caution 2: Run ACD Setup before con
Page 963 and 964:
Function Start End Base Local call
Page 965 and 966:
The General tab consists of the fol
Page 967 and 968:
2. Check the Mailbox box of the gro
Page 969 and 970:
2. In the Agents Sets area, click M
Page 971 and 972:
3. Set the ACD ports to 0. 4. Click
Page 973 and 974:
_nigeb-egnahc_ _dne-egnahc_ - A
Page 975 and 976:
2. Enter the name of the group in G
Page 977 and 978:
2. Select one of three possible act
Page 979 and 980:
Example 2: If x = 3, the announceme
Page 981 and 982:
etween 1 and 8. The same level of p
Page 983 and 984:
The defined exceptional days are li
Page 985 and 986:
2. Select the planning of your choi
Page 987 and 988:
• Agent n°. (number) : identific
Page 989 and 990:
10.3.3.1.3 Login/logout from a phon
Page 991 and 992:
Force automatic call answer feature
Page 993 and 994:
10.3.4.2.2 Description of the Call
Page 995 and 996:
• No hard disk is necessary • L
Page 997 and 998:
Figure 10.21: Example of Call Routi
Page 999 and 1000:
Figure 10.23: .csv File before Modi
Page 1001 and 1002:
• select an announcement to be ad
Page 1003 and 1004:
10.4.2.2.4 Recording Automatic Call
Page 1005 and 1006:
- AG:: Agent xx-yyy where xx is the
Page 1007 and 1008:
11.1 OMC 11.1.1 Overview OMC is the
Page 1009 and 1010:
personal belongings. For more infor
Page 1011 and 1012:
- OLITEC USB ISDN 128K - Multitech
Page 1013 and 1014:
In the current version of the syste
Page 1015 and 1016:
- In OMC, select Options > Change P
Page 1017 and 1018:
Click on the After OMC disconnect b
Page 1019 and 1020:
The OmniPCX Office software (with o
Page 1021 and 1022:
Features included Easy EasyPlus Exp
Page 1023 and 1024:
Features included Easy EasyPlus Exp
Page 1025 and 1026:
11.1.8.2 Individual types of audio
Page 1027 and 1028:
Note: In order to transfer audio fi
Page 1029 and 1030:
6. Specify the destination path for
Page 1031 and 1032:
11.2.1.1.1 ACCESS TO THE MMC Access
Page 1033 and 1034:
11.2.1.1.5 CONFIGURABLE FEATURES IN
Page 1035 and 1036:
11-29
Page 1037 and 1038:
station must be switched off by pre
Page 1039 and 1040:
Restriction level of trunk groups (
Page 1041 and 1042:
NUMBER makes it possible to erase A
Page 1043 and 1044:
KEY FUNCTION PARAMETERS SelFwd Sele
Page 1045 and 1046:
Note 2: This paragraph only describ
Page 1047 and 1048:
concerned (4 services maximum). By
Page 1049 and 1050:
Press COUNT. 11.2.3.1.1 PRINTING OF
Page 1051 and 1052:
11-45
Page 1053 and 1054:
Confirm the password by entering it
Page 1055 and 1056:
TRANSP: by successively pressing th
Page 1057 and 1058:
MODIFY after pressing this key, ent
Page 1059 and 1060:
DIRECT : by successively pressing t
Page 1061 and 1062:
transmitted on each access. For exa
Page 1063 and 1064:
Press GROUPS. 11.2.9.1.1 CALL PICKU
Page 1065 and 1066:
Press RSTSYS. TEMP: by successively
Page 1067 and 1068:
11.2.11.1.4MANAGER-ASSIST PROFILES
Page 1069 and 1070:
11.2.12 Metering Configuration 11.2
Page 1071 and 1072:
MASK: by successively pressing this
Page 1073 and 1074:
CSTOLM: by successively pressing th
Page 1075 and 1076:
The personal speed dial numbers, RS
Page 1077 and 1078:
DESIGNATION INTNUM grants access to
Page 1079 and 1080:
Parking Send MF num Doorphone Parki
Page 1081 and 1082:
11.2.18.1 Operation WARNING: This f
Page 1083 and 1084:
egistration is based on the recepti
Page 1085 and 1086:
TIME makes it possible to state the
Page 1087 and 1088:
Press ARSCAL. 11.2.23.1.1TIME RANGE
Page 1089 and 1090:
Press NAME. Enter the Multi Reflexe
Page 1091 and 1092:
- NIGHT: lets you access voice guid
Page 1093 and 1094:
12.1 Problem-Solving Methodology 12
Page 1095 and 1096:
- Wait for the LED to go to steady
Page 1097 and 1098:
according to the default numbering
Page 1099 and 1100:
network. Default parameters are con
Page 1101 and 1102:
phone set on connection. To keep in
Page 1103 and 1104:
At the end of the session, a messag
Page 1105 and 1106:
Type Message Location Additional In
Page 1107 and 1108:
Page 1109 and 1110:
Page 1111 and 1112:
Page 1113 and 1114:
Page 1115 and 1116:
Page 1117 and 1118:
Page 1119 and 1120:
Page 1121 and 1122:
Page 1123 and 1124:
Before R3.1 R3.1 R4.0 R4.1 R5.0 R5.
Page 1125 and 1126:
Before R3.1 R3.1 R4.0 R4.1 R5.0 R5.
Page 1127 and 1128:
21H : slave DECT base interface 22H
Page 1129 and 1130:
a version which does not correspond
Page 1131 and 1132:
- there is a power supply problem (
Page 1133 and 1134:
12.7.1.1.2 Web-Based Tool Web-Based
Page 1135 and 1136:
- Click on the Submit button. Insta
Page 1137 and 1138:
13.1 Certificate Management 13.1.1
Page 1139 and 1140:
4. Select the appropriate path to s
Page 1141 and 1142:
- My IC Web for Office - PIMphony A
Page 1143 and 1144:
access and block remote access), re
Page 1145 and 1146:
13.2.2.2 Password configuration All
Page 1147 and 1148:
2. Enter the current OMC session pa
Page 1149 and 1150:
14.1 Software Keys 14.1.1 Services
Page 1151 and 1152:
For a system in limited mode, when
Page 1153 and 1154:
Controlled services Relevant softwa
Page 1155 and 1156:
Page 1157 and 1158:
Page 1159 and 1160:
arborescence. NTP Protocol distribu
Page 1161 and 1162:
The 500 DECT has no automatic or pe
Page 1163 and 1164:
14.2.6 Configuration The NTP synchr
Page 1165 and 1166:
IP sets and Alcatel-Lucent OmniSwit
Page 1167 and 1168:
3. Define the range of IP addresses
Page 1169 and 1170:
Note 3: Carefully verify your entri
Page 1171 and 1172:
15.1 A ACD Automatic Call Distribut
Page 1173 and 1174:
15.4 D DAP DECT Access Point DASS2
Page 1175 and 1176:
Internet Protocol Security. Standar
Page 1177 and 1178:
POP3 Post Office Protocol. Standard
Page 1179 and 1180:
TERMINAL GROUP Series of terminals
show all

Expert Documentation

Create successful ePaper yourself

Delete template?

Save as template?