Expert Documentation

Account code with substitution
Service enabling a user to set up a call on one set with the account code assigned to another
set.
The user makes a call in the following way: account code prefix + account code + No. of
the substitution set (optional) + password (optional) + prefix for accessing the trunk
group + called party's No.
8.2.2 Configuration
8.2.2.1 Configuration procedure
8.2.2.1.1 PARAMETERS TO BE CONFIGURED
This chapter presents the main parameters that need to be configured for the hotel application.
Installation numbers
- Enter the installation number, the intercity code and the international access prefix
Dialing plans
- Internal dialing plan, enter the:
• station numbers: administration, rooms, house phones, fax, etc.
• prefixes: wake-up call, main and secondary trunk group, Room status (see System
Parameters), Reception call, etc.
- Public dialing plan, enter the:
• station DID numbers: administration, Reception, fax, etc.
• room set DID numbers (see the VisFr and VisAl features in System Parameters)
- Feature access codes, enter the suffixes for: consultation call, broker call, DND override
(see System Parameters), conference, etc.
Set categories
- Declare the sets: "Administration", "Guest" or "House phone (Phone booth)" (see the
Class feature in System Parameters)
Reception set
- Create a "Hotel" key (see the Hotel feature in System Parameters)
- Create the "RSL" keys for the sets: rooms, house phones, etc. (see the RSL feature in
System Parameters)
Room service station
- Create the numbers for the service in the internal numbering plan
- Create a "RSD" key for each service on the Room service station (see the RSD feature in
System Parameters)
House phone (Phone booth)
- Configure the house phone by using the features:
8-7