Expert Documentation

Type Message Location Additional Information Action
127 DSP RESULT CODES
These codes are used in confirmation
messages and by the
reception buffer
128 DSP KO
The DSP of one of the controller
boards is out of service.
129 CPU KO
PowerCPU board not detected
by the backpanel board 10
minutes after initialization
140 UNREGISTRATION
SIP un-registration
141 REGISTER OK
SIP registration success
142 REGISTER 500
SIP registration failure (500:
Server error)
143 REGISTER 423
SIP registration failure (423: Interval
too brief)
Controller
board (81 or
82)
CPU (80) or
controller
board (81 or
82)
CPU (80)
CPU (80)
CPU (80)
CPU (80)
INFO 0 = DSP type 0 or 1 (DSP0 or
DSP1)
INFO 1 = Result code
INFO 2 = Result sub-code
INFO 3 = Type of resource
INFO 0 = 0 or 1 (DSP0 or DSP1)
INFO 0 = type of CPU (0 = Internet
access; 1 = VoIP)
INFO 1 = number of CPU resets
during the-10 minute period
INFO 2 = CPU state
INFO 3 = last byte of MAC
(Ethernet) Internet address of CPU
INFO 0 = octet 1 of the IP address
of the remote registry
INFO 1 = octet 2 of the IP address
of the remote registry
INFO 2 = octet 3 of the IP address
of the remote registry
INFO 3 = octet 4 of the IP address
of the remote registry
INFO 0 = octet 1 of the IP address
of the remote registry
INFO 1 = octet 2 of the IP address
of the remote registry
INFO 2 = octet 3 of the IP address
of the remote registry
INFO 3 = octet 4 of the IP address
of the remote registry
INFO 0 = octet 1 of the IP address
of the remote registry
INFO 1 = octet 2 of the IP address
of the remote registry
INFO 2 = octet 3 of the IP address
of the remote registry
INFO 3 = octet 4 of the IP address
of the remote registry
INFO 0 = octet 1 of the IP address
of the remote registry
INFO 1 = octet 2 of the IP address
of the remote registry
INFO 2 = octet 3 of the IP address
of the remote registry
INFO 3 = octet 4 of the IP address
of the remote registry
12-23