Expert Documentation

Chapter 8
Figure 8.35: Configuring the "Local Call Metering" application
• Click Save to save the Alcatel-Lucent OmniPCX Office Communication Server Host
Name address and the Admin password to the LCMA.conf configuration file.
• Click Default to set all fields to their default values.
• Click Autodetect to detect automatically the Alcatel-Lucent OmniPCX Office
Communication Server host name address.
Note 1:
If the Autodetect feature fails, the field can also be filled in manually.
• Click TestConnection to test the Alcatel-Lucent OmniPCX Office Communication
Server Host Name address, the Admin password and the application version.
• Click Start /Stop to start or stop the "local call metering" service.
Note 2:
The current application status is indicated by a green or red icon.
• The Call Log Update Timer is a timer mechanism to read in time the call log from the
Alcatel-Lucent OmniPCX Office Communication Server.
The number of Open Telephony Server logs is limited to 200 in the Alcatel-Lucent
OmniPCX Office Communication Server. The "CALLLOG_UPDATE_TIMER"
parameter must be managed according to the number of users and traffic in order to
avoid any loss of logs.
2. Once you have verified that all fields contain the desired values, click OK to save the
values to the LCMA.conf configuration file and quit the "local call metering" application
8-60