Expert Documentation

- Avoid the use of simple passwords such as suite of figures or repeated figures
- Force OmniPCX Office users to change the default password when initializing their voice mail
- Do not disclose passwords to other persons/colleagues, etc.
- Lock extensions when not being attended (i.e. holidays, night time, weekend, etc.)
Password creation and security is the responsibility of the user/system Administrator or Installer.
Therefore, if somebody accesses the PA (Personal Assistant), remote call forwarding
configuration, nomadic mode configuration or DISA Transit (remote substitution) and uses a
correct password, it is assumed that this person is an authorized user of the password.
If the user accidentally activates the voice mail unit in while Connected, he will find that he is
refused access to his mailbox.
Subsequent accesses can be made in Application mode or Connected mode (see "Operating
modes: Connected/Application/CSTA")
Note:
The password is only required if the parameter Password required for mailbox access (OMC -> Voice
Processing -> General Parameters) is selected; if not, the password is not necessary.
Deleting a Mailbox
The Administrator can delete mailboxes. If the mailbox contains messages (read or unread),
these are kept for X minutes and can be accessed/reviewed by the user while in Application; if
the mailbox is assigned to someone else within the period of X minutes, the messages are
lost.
Deleting Mailboxes
From version R2.0, you may use OMC to delete the mailboxes of all the selected users:
Users/Basestations List -> Del. Mailboxes
Dead mailbox timeout durations:
- System is in "Business" mode: timeout X = 5 minutes
- System is in "Hotel" mode: timeout X = 50 minutes
This value can be modified in OMC (unit = 100 milliseconds; min value = 0; max value = 32767
i.e. about 54 minutes): System Miscellaneous -> Memory Read/Write -> Debug Labels ->
DeadMbTo
Non-Existent Mailbox
This function offers the following possibilities in the event of a call being forwarded or put
through by the Automated Attendant to a non-existent mailbox:
- Not used: the caller is routed to the Automated Attendant (default setting).
- Free dialing: the caller is prompted to dial an internal destination number.
- Transfer to user: the caller is routed to a predefined internal number.
- Transfer to attendant: the caller is routed to the Attendant station.
- Information message: the caller is played an information message chained with the
welcome message.
- General mailbox: the caller is routed to the general mailbox.
4-17