Expert Documentation

2. Select Name and enter the name to be associated with the selected key, then press OK.
The desired name is associated with the key.
3. Select Number and enter the telephone number to be associated with the key, then press
OK.
The desired number is associated with the key.
4. Press Exit to go back to the home page.
Relocating and retaining IP Touch sets
This section describes how to relocate and retain the same set.
In the procedure below, it is assumed that:
- there is one DHCP server
- no VLAN has to be configured.
Prerequisites
None.
Relocating and retaining the same set
To relocate and retain the same set:
1. Unplug the set.
2. Plug the set into a connector at its new location.
Rebooting the set
As of R9.0, to reboot a set:
1. In OMC, go to Users/Base stations List > Details.
2. Click Reset button.
The Reset window opens.
3. Select Reboot and click OK.
4. In the confirmation window, click Yes.
2.3.6.4 Bluetooth - Basic description
2.3.6.4.1 Overview
The Alcatel-Lucent IP Touch 4068 Phone set features Bluetooth® class 3 (1mW) wireless
technology. This technology uses the ISM 2.4 GHz radio frequency band.
Wireless audio accessory Bluetooth® 1.1, 1.2 and 2.0 with headset profile operates with
Alcatel-Lucent IP Touch 4068 Phone.
Optimum audio quality is obtained at up to 3 meters line of sight from the Alcatel-Lucent IP
Touch 4068 Phone terminal. The range of a Bluetooth® device class 3 is around 10 meters.
The ISM 2.4 GHz radio frequency spectrum may be shared with other applications. Bluetooth®
1.2 version is more robust to the interference caused by Wifi 802.11b and 802.11g devices.
The Alcatel-Lucent IP Touch 4068 Bluetooth® Handset reference 3GV27007xx is 1.2 enabled
and operates with Alcatel-Lucent IP Touch 4068 Phone reference 3GV27043xx from
Alcatel-Lucent OmniPCX Office Communication Server R4.1.
2-117