Expert Documentation

Chapter 7
Registered User Name
Expiration Time
Enter the name provided by the provider. This can be for example
the installation number.
In this field is left empty, the name of the main VoIP board is
used.
Enter the validity time of the registration.
Default value: 3600 s
4. If DNS SRV is not used, review/modify the following attributes:
Registrar IP Address
Port
Outbound Proxy IP
Enter the Registrar IP address.
Enter the port number to be used for registration.
Enter the Outbound Proxy IP address.
5. If DNS SRV is used, check the DNS SRV box and review/modify the following attributes:
Registrar Name
Outbound Proxy
Enter the Registrar name.
Enter the Outbound Proxy name.
6. OmniPCX Office supports the Digest authentication scheme (MD5). If OmniPCX Office
must authenticate to the provider, enter the authentication parameters:
User Name
Shared Secret
Registered Realm
Enter the user name (login) for authentication.
Enter the password associated with the user name for authentication.
Enter the realm name.
7.6.3.2 Configuring the “End of Dialing Table”
If the "End of Dialing table used" box has been checked in the Gateway tab (see paragraph
Configuring the Gateway Timers (Optional) , the "End of Dialing Table"must be configured.
1. By OMC (Expert View):
System -> Numbering -> End of Dialing Table
2. Configure the Prefix and the Counter with the desired embedded softphone dialing
number.
7.6.3.3 Configuring the IP Trunking traffic sharing and baring
Refer to Link Categories - Configuration procedure .
- Selecting the VoIP trunk and setting the traffic sharing and the barring
• By OMC (Expert View):
for access: System -> External Lines-> List of accesses -> Details -> Link Cat
- Adding the VoIP trunk in the trunks group and setting the traffic sharing and the barring
• By OMC (Expert View):
7-52