Expert Documentation

More documents

Recommendations

Info

Chapter 4 • stop and terminate the recording (# key). 4.3.3 Consulting a mailbox 4.3.3.1 Detailed description The diagram on the next page summarizes the mailbox access steps and options. 4.3.3.1.1 Description This service enables users to call their mailbox and listen to any messages received (whether new or already heard), listen to recorded conversations, send messages, or remotely configure some mailbox parameters (see appropriate paragraph). This service is protected by a password (the same as for the subscriber). In Application mode however consultation is possible without a password, depending on the state of the mailbox consultation flag (OMC -> Voice Processing -> General Parameters -> Mailbox Consultation). The default value is no password. 4.3.3.1.2 Commissioning Users access their mailboxes: - in Application mode: • sets with a fixed Mail key: using this key (or the appropriate code) • stations with displays: Voice key + password • stations without displays: password. • stations without a fixed Mail key: Mail service code or programmed key + password 4.3.3.1.3 Additional Information - The new message notification mode (voice prompt on going off-hook, LED or icon) depends on the type of terminal; for analog sets with a LED, a virtual key has to be created. Conversation recordings are not notified. - Number of messages/conversations: • stations with display: the number of messages (old and new) and the number of conversations recorded are displayed at the start of the access. • stations without displays: • case 1: mailbox containing new messages only: a voice prompt indicates the number of new messages. • case 2: mailbox containing old messages only: a voice prompt indicates the number of messages already heard. • case 3: mailbox containing new and old messages: only the number of new messages is announced. • case 4: the number of conversations is never announced. - When accessing the mailbox (Connected or Application mode) the "Mailbox -> Please enter the mailbox number" menu can be opened by pressing the * key before entering the password (this enables users to access their chosen mailbox). - Email notification of new messages: In R2.0 (Premium solutions only), an Email (HTML format, or text format if display with HTML is not possible) is sent when a new message is left in the mailbox. The voice mail is 4-26
sent as an attachment in the form of a .WAV file (16 bits, 8 kHz). A voice mail that has been listened to via e-mail is still regarded as a new message when accessing the mailbox. Via the WBM, access the User Settings window. In the Voice messages field of the Absence tab, check the Display voice message as an attachment (WAV) box to be notified when a voice message is deposited in the box and to listen to it. For more information, see the User and User groups section. 4-27
Page 1 and 2:
Expert Documentation Release 9.1 -
Page 3 and 4:
Chapter 1 General Presentation Cla
Page 5 and 6:
V24/CTI Interface Module ..........
Page 7 and 8:
Configuration procedure ...........
Page 9 and 10:
Configuration procedure ...........
Page 11 and 12:
Overview ..........................
Page 13 and 14:
General Presentation ..............
Page 15 and 16:
Overview ..........................
Page 17 and 18:
Chapter 8 General Applications PIM
Page 19 and 20:
Overview ..........................
Page 21 and 22:
DECT ..............................
Page 23 and 24:
B .................................
Page 25 and 26:
1.1 Clauses 1.1.1 Clauses Copyright
Page 27 and 28:
• The Alcatel-Lucent OmniPCX Offi
Page 29 and 30:
1.2.3.4 OmniPCX Office RCE Compact
Page 31 and 32:
Board Function Optional boards Conn
Page 33 and 34:
Type of module Primary T1 + T2 + DL
Page 35 and 36:
Type of module TAPI 2.1 servermonit
Page 37 and 38:
BOARDS SLOTS 1-2 CPU SLOT PowerCPU
Page 39 and 40:
BOARDS MIX SLOT CPU SLOT PowerCPU N
Page 41 and 42:
BOARDS AND TERMINALS OmniPCX Office
Page 43 and 44:
Essential Requirements Directive 19
Page 45 and 46:
Essential Requirements Directive 19
Page 47 and 48:
Interface Specifications ETSI Stand
Page 49 and 50:
Product OmniPCX Office RCE Compact
Page 51 and 52:
Product DECT/WLAN Handsets Product
Page 53 and 54:
Product DECT Outdoor Radio Base Pro
Page 55 and 56:
ytes (which is the limit in the exi
Page 57 and 58:
- Relative humidity: relative humid
Page 59 and 60:
2.1 C, S, M, L Racks 2.1.1 Hardware
Page 61 and 62:
2.2 Boards 2.2.1 POWER CPU 2.2.1.1
Page 63 and 64:
Name Color Function Figure 2.5: Pow
Page 65 and 66:
Available functions:: - LAN: 10/100
Page 67 and 68:
Audio Input Characteristics: Input
Page 69 and 70:
2.2.1.3.8 Connecting a Doorphone 2
Page 71 and 72:
The PowerMEX board (POWER Module EX
Page 73 and 74:
2.2.3.2 External connections 2.2.3.
Page 75 and 76:
Connections The ISDN-EFM box must b
Page 77 and 78:
2.2.4.2 Hardware configuration 2.2.
Page 79 and 80:
RJ45 pin 1 2 3 4 5 6 7 8 NETW outpu
Page 81 and 82:
RJ45 pin 1 2 3 4 5 6 7 8 Outputs 1
Page 83 and 84:
- MIX044: 4 UA interfaces and 4 Z i
Page 85 and 86:
2.2.8.1 Basic description The Mini-
Page 87 and 88:
2.2.9 AMIX-1 Figure 2.39: Mini-MIX
Page 89 and 90:
RJ45 pin 1 2 3 4 5 6 7 8 AT outputs
Page 91 and 92:
RJ45 pin 1 2 3 4 5 6 7 8 Outputs L1
Page 93 and 94:
RJ45 pin 1 2 3 4 5 6 7 8 Outputs 1
Page 95 and 96:
2.2.11.2 External connections 2.2.1
Page 97 and 98:
2.2.12.1.1 LANX-2 boards The LanX8-
Page 99 and 100:
Each category-5 RJ45 connector has
Page 101 and 102:
Basic 10/100 BT connection MDI-X to
Page 103 and 104:
RJ45 pin 1 2 3 4 5 6 7 8 Output1 ZS
Page 105 and 106:
2.2.14.2 External connections 2.2.1
Page 107 and 108:
2.2.15.1.2 Power Supply PS2/PS2N Po
Page 109 and 110:
2.2.15.1.4 Batteries Equipment: - O
Page 111 and 112:
Equipment The following table indic
Page 113 and 114:
_dne-egnahc_ 2.3.1.1.2 Equipme
Page 115 and 116:
_nigeb-egnahc_ _dne-egnahc_ Ke
Page 117 and 118:
• In dynamic mode, a DHCP server
Page 119 and 120:
The DHCP offer provides the followi
Page 121 and 122:
Displayed Status Set not connected
Page 123 and 124:
- Other SIP phones with video capab
Page 125 and 126:
Figure 2.88: 8082 My IC Phone Scree
Page 127 and 128:
- Wide view field - Omni-directiona
Page 129 and 130:
2.3.2.3.2 Commissioning the set Fig
Page 131 and 132:
- Initialize the 8082 My IC Phone s
Page 133 and 134:
• Enable and configure a DHCP Use
Page 135 and 136:
Displaying SIP Connection Current S
Page 137 and 138:
The Video Support feature right is
Page 139 and 140:
Figure 2.96: 4135 IP Conference Pho
Page 141 and 142:
Figure 2.100: 4135 IP Conference Ph
Page 143 and 144:
To connect the set to the LAN: 1. T
Page 145 and 146:
• The Files of type field indicat
Page 147 and 148:
3. Select IP terminal and enter a N
Page 149 and 150:
2. Read the SIP connection status (
Page 151 and 152:
- Set features - Set keyboard - Set
Page 153 and 154:
Key Action Mute (with green LED) -
Page 155 and 156:
Figure 2.102: Alcatel-Lucent IP Tou
Page 157 and 158:
You do not use a DHCP server Static
Page 159 and 160:
In the procedure below, it is assum
Page 161 and 162:
auto-negotiation, this is the best
Page 163 and 164:
2.3.6.1.2 Instant Business Communic
Page 165 and 166:
Set features Figure 2.103: Alcatel-
Page 167 and 168:
Key Hands-free (with green LED) Vol
Page 169 and 170:
Edition), unless specifically indic
Page 171 and 172:
You do not use a DHCP server Static
Page 173 and 174:
- AOM Alcatel-Lucent 8 series and A
Page 175 and 176:
2. Select Name and enter the name t
Page 177 and 178:
Connecting the Battery Figure 2.105
Page 179 and 180:
2.3.6.6 Maintenance 2.3.6.6.1 Overv
Page 181 and 182:
Terminal Port External Device Port
Page 183 and 184:
Figure 2.106: Alcatel-Lucent 4019 D
Page 185 and 186:
Key Help/Menu Action Menu - Press o
Page 187 and 188:
Connecting the set to the telephone
Page 189 and 190:
- Set features - Set keyboard - Set
Page 191 and 192:
Key Hands-free (with green LED) Vol
Page 193 and 194:
Figure 2.109: Alcatel-Lucent 4029 D
Page 195 and 196:
The 3.5 mm female jack can receive
Page 197 and 198:
For the input methods of Pinyin, St
Page 199 and 200:
Figure 2.112: Change input method I
Page 201 and 202:
Figure 2.116: Configure a phone nam
Page 203 and 204:
terminal to be updated. - Downloads
Page 205 and 206:
- ISO 14040: Environmental manageme
Page 207 and 208:
Figure 2.119: Example of Configurat
Page 209 and 210:
The Option 4099 (Multiple UA Hub) s
Page 211 and 212:
2.3.15 Base Stations 2.3.15.1 Hardw
Page 213 and 214:
Master link not connected, local po
Page 215 and 216:
Relative Humidity 5 - 95 % PoE Spec
Page 217 and 218:
are available in 2 models: a. Mobil
Page 219 and 220:
Figure 2.128: Alcatel-Lucent 300 DE
Page 221 and 222:
The following table lists handset k
Page 223 and 224:
directions) and confirmation. You c
Page 225 and 226:
This set provides: Figure 2.130: 50
Page 227 and 228:
KEY USE Allows to: - Switch the set
Page 229 and 230:
2.3.18.1.2 Key benefits Figure 2.13
Page 231 and 232:
- DECT - Frequency range: • DECT
Page 233 and 234:
• EN 300 175-8 (DECT audio) • E
Page 235 and 236:
The Braille keyboard, in the center
Page 237 and 238:
OPTIONAL MODULES (PLUGWARE) The opt
Page 239 and 240:
4094 ISW module This module connect
Page 241 and 242:
Numerical keypad keys 12 12 12 12 1
Page 243 and 244:
Handset YES YES YES YES YES Loudspe
Page 245 and 246:
The maximum length of the ADB link
Page 247 and 248:
Numeric keypad keys 12 12 12 12 Lin
Page 249 and 250:
On/Off Key YES Display: 2 x 16 alph
Page 251 and 252:
3.1 Meet Me Conference 3.1.1 Basic
Page 253 and 254:
The values in "Start" and "End" wit
Page 255 and 256:
3.1.1.1.6 Restrictions In OmniPCX O
Page 257 and 258:
• by OMC (Expert View): Users/Bas
Page 259 and 260:
Page Key Operator Secretary Manager
Page 261 and 262:
Page Key Operator Secretary Manager
Page 263 and 264:
3.2.2.2.1 Key System Mode Same as A
Page 265 and 266:
- The maximum number of trunk group
Page 267 and 268:
- To authorize immediate group forw
Page 269 and 270:
Function keys Normal/Restricted mod
Page 271 and 272:
System Miscellaneous -> Feature Des
Page 273 and 274:
...depending on the mode, normal or
Page 275 and 276:
COS restriction (barring) makes it
Page 277 and 278:
The system uses the end of dialing
Page 279 and 280:
• if the splitting is PAUSE, dial
Page 281 and 282:
- internal callback - call from an
Page 283 and 284:
• by OMC (Expert View): VMU as Au
Page 285 and 286:
3.11 Time ranges 3.11.1 Overview Pr
Page 287 and 288:
3.12.1.1 Description System's opera
Page 289 and 290:
- by OMC (Expert View): Numbering -
Page 291 and 292:
3.14.2.1 Configuration - Define the
Page 293 and 294:
- An external call on an analog lin
Page 295 and 296:
Tree diagram operational after the
Page 297 and 298:
DID numbers can: - contain up to 8
Page 299 and 300:
• for the 2nd sequence: substitut
Page 301 and 302:
CW Call Waiting NO HOLD NO YES MCID
Page 303 and 304:
Group broadcast * 01 to *08 * 01 to
Page 305 and 306:
when making an outgoing ISDN (or VO
Page 307 and 308:
3.20.1.2.4 Interactions When severa
Page 309 and 310:
Alternative CLIP/COLP Number Enter
Page 311 and 312:
party's voice mailbox if the line i
Page 313 and 314:
- A CCBS callback cannot be interce
Page 315 and 316:
handling of fax detection. 3.24.2 C
Page 317 and 318:
Note: If the service is not active
Page 319 and 320:
3.26.1 Overview 3.26.1.1 Descriptio
Page 321 and 322:
- auto-answer or Intercom (on a set
Page 323 and 324:
System Miscellaneous -> Feature Des
Page 325 and 326:
Analog (Z) Intercom mode -- -- With
Page 327 and 328:
_nigeb-egnahc_ 3.27.1.1 Overview
Page 329 and 330:
server. The keep-alive feature is e
Page 331 and 332:
3.28.1.1 DESCRIPTION A user is auto
Page 333 and 334:
Barge-in Feature code P.K.: Barge-i
Page 335 and 336:
Consultation of campedon caller ide
Page 337 and 338:
• the call is returned to the gen
Page 339 and 340:
Consultation call (enquiry) (Europe
Page 341 and 342:
P.K.: Programmed Key - defined by O
Page 343 and 344:
it possible to activate or cancel t
Page 345 and 346:
Type of forwarding Follow-me Prefix
Page 347 and 348:
3.33.2.1 CONFIGURATION - To specify
Page 349 and 350:
Note: • when DTMF end-to-end sign
Page 351 and 352:
- a call arriving at the general le
Page 353 and 354:
Parking of an external party Parked
Page 355 and 356:
Paging by prefix, mode 4 Paging by
Page 357 and 358:
Starting with version R2.0 of the s
Page 359 and 360:
- Calls from external Z users to st
Page 361 and 362:
The keypad dialing features offer a
Page 363 and 364:
• by DHM-OMC (Expert View): Syste
Page 365 and 366:
• by OMC: System Miscellaneous ->
Page 367 and 368:
The system can be used to program 3
Page 369 and 370:
Attendant forwarding Depending on a
Page 371 and 372:
The external destination is called
Page 373 and 374:
3.46 Multi-sets 3.46.1 Overview 3.4
Page 375 and 376:
Note the following restrictions in
Page 377 and 378:
Feature rights Dynamic routing Pers
Page 379 and 380:
Pick-up group Broadcast group Redia
Page 381 and 382:
BUSY2 PRIMARY: no ring SECONDARY: n
Page 383 and 384:
• by OMC Users/Base stations List
Page 385 and 386:
- by OMC Users/Base stations List -
Page 387 and 388:
Page 389 and 390:
The transfer can be performed on th
Page 391 and 392:
• pressing the UPK corresponding
Page 393 and 394:
On all phones, the "Transfer to VMU
Page 395 and 396:
When the SMS transparency feature i
Page 397 and 398:
This configuration is performed usi
Page 399 and 400:
- The "Remote Forwarding" feature u
Page 401 and 402:
destination station and the lines t
Page 403 and 404:
3.53.3.2 CANCELLATION All stations
Page 405 and 406:
- XX-XX = trunk group number used i
Page 407 and 408:
- To activate headset mode (MMC-Sta
Page 409 and 410:
3.57.3 Operation 3.57.3.1 ACTIVATIO
Page 411 and 412:
Analog (Z) Supervised call ringing
Page 413 and 414:
3.59.1.1.5 Stations without soft ke
Page 415 and 416:
3.59.1.1.7 Analog Z stations
Page 417 and 418:
Teamwork simplifies the call manage
Page 419 and 420:
- To create the code for activating
Page 421 and 422:
- The service is refused if the ben
Page 423 and 424:
Page 425 and 426:
- The calling party CLI (Calling Li
Page 427 and 428:
Details of the access algorithm Fig
Page 429 and 430:
- To deactivate fax notification on
Page 431 and 432:
If the calling party picks up the c
Page 433 and 434:
Figure 3.44: Scenario 3.67.2 Detail
Page 435 and 436:
Figure 3.45: Scenario Internal user
Page 437 and 438: OCD class City/Area call National C
Page 439 and 440: - Click this icon to modify the Nom
Page 441 and 442: • All Calls: When validated, all
Page 443 and 444: _nigeb-egnahc_ _dne-egnahc_ 3.71
Page 445 and 446: _nigeb-egnahc_ _dne-egnahc_ - Alc
Page 447 and 448: 3.72 List of services provided 3.72
Page 449 and 450: 4008, 4018 4019 4028, 4029 4038, 40
Page 451 and 452: Auto-answer mode (intercom mode) Au
Page 453 and 454: First Easy Premium Advanced Analog
Page 455 and 456: 500 DECT Conference Callback Name D
Page 457 and 458: Callback (4) 8002/801 2 Deskph one
Page 459 and 460: ISDN (4) Personal Speed Dial (4) Se
Page 461 and 462: Wake up (4) PIMphony/OTS supervisio
Page 463 and 464: 4.1 General Presentation 4.1.1 Over
Page 465 and 466: - VMU ports: 2 ports are provided f
Page 467 and 468: - Association of a mailbox to a giv
Page 469 and 470: 4.2.1 Accessing VMU/the attendant 4
Page 471 and 472: Only the menus of the main language
Page 473 and 474: • By OMC (Expert View): Voice Pro
Page 475 and 476: "Press Star" question are skipped a
Page 477 and 478: By MMC-OMC (Expert View): Voice Pro
Page 479 and 480: - Avoid the use of simple passwords
Page 481 and 482: • By OMC (Expert View): Users/Bas
Page 483 and 484: 4.2.6 Distribution list 4.2.6.1 Ove
Page 485 and 486: - Number of messages left by caller
Page 487: • By MMC-OMC (Expert View): Voice
Page 491 and 492: 4.3.5.1 Detailed description 4.3.5.
Page 493 and 494: - To activate remote notification o
Page 495 and 496: - the caller is informed that the p
Page 497 and 498: 4.3.12.1.4 Stations without soft ke
Page 499 and 500: 4.3.12.1.6 Analog Z stations
Page 501 and 502: configure some items in their mailb
Page 503 and 504: - Avoid the use of simple passwords
Page 505 and 506: When the maximum number of attempts
Page 507 and 508: 3. Click OK. The remote access is u
Page 509 and 510: The user workstation consists of: -
Page 511 and 512: protocol, can be utilized in place
Page 513 and 514: By MMC-OMC (Expert View): Subscribe
Page 515 and 516: 5.1 DECT 5.1.1 DECT Overview 5.1.1.
Page 517 and 518: The coverage radius of a DECT radio
Page 519 and 520: Country or zone of registration Cor
Page 521 and 522: Country or zone of registration Cor
Page 523 and 524: The rules for calculating the numbe
Page 525 and 526: Technical Classification of the Sit
Page 527 and 528: Case of a Full DECT optimization of
Page 529 and 530: • Confirm the number of zones •
Page 531 and 532: of installation for China and South
Page 533 and 534: For some traffic extension or local
Page 535 and 536: - the complexity of the coverage fo
Page 537 and 538: Note 3: Directive antennas for the
Page 539 and 540:
NTP_WLAN network 10 dBm: NTP_WLAN n
Page 541 and 542:
Characteristics: for an IBS connect
Page 543 and 544:
APPENDIX 3 : Criteria for Central P
Page 545 and 546:
Once this has been done, slide the
Page 547 and 548:
Attaching a 4070 EO Base Station Wa
Page 549 and 550:
Remark 1: screws to be used: Ø3.5
Page 551 and 552:
Internal Power Supply - The power o
Page 553 and 554:
It is structured as follows: - the
Page 555 and 556:
system restart and plug in the IBSs
Page 557 and 558:
Figure 5.21: PWT Frequencies 5.1.3
Page 559 and 560:
Only the 4080 IP-DECT AP300 is supp
Page 561 and 562:
As this information is confidential
Page 563 and 564:
The DAPs configuration file is then
Page 565 and 566:
Note: The DECT registration period
Page 567 and 568:
4. Enter the current OMC session pa
Page 569 and 570:
Save Enter the phone number assigne
Page 571 and 572:
Note 1: You are advised not to sele
Page 573 and 574:
5.1.6.3 Services provided 5.1.6.3.1
Page 575 and 576:
5.1.6.5.1 Activating radio test mod
Page 577 and 578:
In practice, you have to select thi
Page 579 and 580:
- Operating and programming limits
Page 581 and 582:
5.1.9 DECT Traffic All counters are
Page 583 and 584:
For the minimum length of the memor
Page 585 and 586:
Example: How to read the handset co
Page 587 and 588:
The Mobicall server intereracts wit
Page 589 and 590:
Norm. 1 Norm. 1 1 Rest. 1 Rest. 1 1
Page 591 and 592:
When a SIP trunk group is used, the
Page 593 and 594:
Auth. code ID Tone/Pause Select Non
Page 595 and 596:
The software client can be either:
Page 597 and 598:
Remark: Analog lines also can be us
Page 599 and 600:
- Basic configuration: the local us
Page 601 and 602:
any fallback mode or business servi
Page 603 and 604:
_nigeb-egnahc_ _dne-egnahc_ _nigeb-
Page 605 and 606:
The My IC Mobile for iPhone does no
Page 607 and 608:
- Voice mail services: • Consult
Page 609 and 610:
The Business Call Log contains call
Page 611 and 612:
_dne-egnahc_ _nigeb-egnahc_ Figure
Page 613 and 614:
_nigeb-egnahc_ _dne-egnahc_ _nigeb-
Page 615 and 616:
transmitting at lower data rates re
Page 617 and 618:
_nigeb-egnahc_ _dne-egnahc_ highes
Page 619 and 620:
_dne-egnahc_ 5.3.4.4 General recom
Page 621 and 622:
OmniPCX Office - OmniPCX Office Web
Page 623 and 624:
_nigeb-egnahc_ _dne-egnahc_ - Pack
Page 625 and 626:
To use My IC Mobile for iPhone appl
Page 627 and 628:
- Unified - Phone - Messaging - Col
Page 629 and 630:
- The enterprise WiFi network withi
Page 631 and 632:
5.4.3.1 Main Features The Alcatel-L
Page 633 and 634:
In some cases, phone numbers for ou
Page 635 and 636:
HTC sensation OK OK 5.4.4 Configura
Page 637 and 638:
colon) and the path to the root URL
Page 639 and 640:
prompted to enter a password before
Page 641 and 642:
different call logs, one for each s
Page 643 and 644:
Figure 5.55: Handset with nomadic a
Page 645 and 646:
Figure 5.59: 8002/8012 Deskphone/80
Page 647 and 648:
6.1 General Presentation 6.1.1 Serv
Page 649 and 650:
6.1.1.1.4 Direct RTP The direct RTP
Page 651 and 652:
The connection between the Home wor
Page 653 and 654:
Modulation) at a sampling rate of 8
Page 655 and 656:
In this configuration, the gatekeep
Page 657 and 658:
H.450.7: Camped-on call signaling H
Page 659 and 660:
Note: See also the Home Worker and
Page 661 and 662:
6.3.5.1 Configuration examples 6.3.
Page 663 and 664:
Bandwidth 64 Kbps 2 128 Kbps 5 256
Page 665 and 666:
Network 6.3.5.1.7 Break In List. Tr
Page 667 and 668:
6.3.5.2.2 CLI authentication For mo
Page 669 and 670:
To unlock the remote access to the
Page 671 and 672:
When the remote access is locked, t
Page 673 and 674:
The main types of requests (which i
Page 675 and 676:
Figure 6.12: Example of a dialog Th
Page 677 and 678:
v=0 o=default 1149510698 1149510698
Page 679 and 680:
m a Media description - image: medi
Page 681 and 682:
to perform a DNS A query (or AAAA f
Page 683 and 684:
Figure 6.16: SIP Trunking Topology
Page 685 and 686:
Feature Transfer (consultation, rin
Page 687 and 688:
Feature Standard Used Connected Ide
Page 689 and 690:
1300 bytes and the path MTU is unkn
Page 691 and 692:
DNS Cache Figure 6.19: Process for
Page 693 and 694:
By default, Number of Retries = 6,
Page 695 and 696:
6.4.2.3.9 Safety Incoming Calls The
Page 697 and 698:
Alternative CLIP/COLP Numbers There
Page 699 and 700:
Format (Incoming)) type. If all rec
Page 701 and 702:
Called Format (Incoming) Format or
Page 703 and 704:
end implied. The COLP feature, Conn
Page 705 and 706:
eception - None: no DTMF By default
Page 707 and 708:
2. The called party answers with on
Page 709 and 710:
Default Audio (G722, G711), Video A
Page 711 and 712:
G.722 codec, without the need for a
Page 713 and 714:
Figure 6.22: Update Method Example
Page 715 and 716:
To enable fax over G.711 for a SIP
Page 717 and 718:
2. Review/modify the followings att
Page 719 and 720:
The figure: ARS Configuration with
Page 721 and 722:
Registration requested Public DDI R
Page 723 and 724:
Fax Select the fax protocol: • T3
Page 725 and 726:
Registrar IP Address Port Outbound
Page 727 and 728:
PrefCodec = 0 PrefFraming = 0 PrefC
Page 729 and 730:
message from the Alcatel-Lucent Omn
Page 731 and 732:
Name NAT Keep Alive Position (byte)
Page 733 and 734:
This parameter allows the IP-PBX to
Page 735 and 736:
Name Position (byte) Length (byte)
Page 737 and 738:
As of R9.1, this parameter allows t
Page 739 and 740:
The bandwidth of an Ethernet LAN ca
Page 741 and 742:
6.4.3.3.1 Authentication and Regist
Page 743 and 744:
channels, i.e.48 "IP" B-channels. N
Page 745 and 746:
and CLIR features are then played a
Page 747 and 748:
emote gateway: • Alive: remote ga
Page 749 and 750:
Function Start End Base NMT Priv Ma
Page 751 and 752:
- Increased performance through tra
Page 753 and 754:
The IP/LAN Configuration property s
Page 755 and 756:
6.6.3.1.4 Priority Mapping This pag
Page 757 and 758:
The "Service Type" column displays
Page 759 and 760:
The direct RTP feature enables dire
Page 761 and 762:
- 48 with ARMADA VoIP32 daughter bo
Page 763 and 764:
- 48 with ARMADA VoIP32 daughter bo
Page 765 and 766:
Data rate (bandwidth) Number of pos
Page 767 and 768:
- Automatic overflow: too much traf
Page 769 and 770:
7.1 General Presentation 7.1.1 Over
Page 771 and 772:
another analog trunk; in this case,
Page 773 and 774:
7.1.2 Services provided OPTIMIZED F
Page 775 and 776:
- manually by the attendant (joinin
Page 777 and 778:
- automatically - manually (for exa
Page 779 and 780:
To redirect the call to the central
Page 781 and 782:
SITUATION Call handling The table b
Page 783 and 784:
During an outgoing call, the ISVPN
Page 785 and 786:
• without specific line seizure
Page 787 and 788:
• by OMC (Expert View), select: D
Page 789 and 790:
Use of default values in the "Calle
Page 791 and 792:
Start End Day group Provider/ Desti
Page 793 and 794:
36123 dialed -> selection of the fi
Page 795 and 796:
Pub 8840721 100 - 200 1 1 "Trunk gr
Page 797 and 798:
"Dialing plan" configuration: - "Se
Page 799 and 800:
Network Prefix Ranges Substitute Tr
Page 801 and 802:
Main numbering plan of PCX B Start
Page 803 and 804:
Outgoing calls Called party number
Page 805 and 806:
For all incoming and outgoing calls
Page 807 and 808:
Information transmitted: - Charged
Page 809 and 810:
Note: A "Non synchronising" access
Page 811 and 812:
etween B and A via the QSIG link. S
Page 813 and 814:
- Synchronization priority: 10 - B-
Page 815 and 816:
7.6.1.4 Synchronizing the OmniPCX O
Page 817 and 818:
embedded softphone. An Internet use
Page 819 and 820:
7.6.3.1.3 Configuring the SIP Param
Page 821 and 822:
for the trunks group: System -> Ext
Page 823 and 824:
Login Password Domain name Realm RF
Page 825 and 826:
7.6.4.2 Configuring the Extended Co
Page 827 and 828:
Maximum number of external users En
Page 829 and 830:
8.1 PIMphony 8.1.1 Overview Alcatel
Page 831 and 832:
OS 8.1.3.3 Limits PIMphony PIMphony
Page 833 and 834:
8.2.1.1.2 HOTEL INSTALLATION When t
Page 835 and 836:
Account code with substitution Serv
Page 837 and 838:
DND override This service enables a
Page 839 and 840:
• by MMC-Station: NumPln -> IntNu
Page 841 and 842:
In the case of a wake-up problem, t
Page 843 and 844:
The Hotel application allows you to
Page 845 and 846:
Note: By OMC, under System Miscella
Page 847 and 848:
- validate all the check-in screens
Page 849 and 850:
- the guest's mail status (messages
Page 851 and 852:
- no message is waiting for the gue
Page 853 and 854:
This feature enables a guest to set
Page 855 and 856:
The RSL key or directory no. allows
Page 857 and 858:
3. When finished, click OK. Note: 8
Page 859 and 860:
Automatic forwarding Conference Tra
Page 861 and 862:
• By OMC (Expert View), select: C
Page 863 and 864:
- Terminal forwarding or external f
Page 865 and 866:
- 2 line counters: • one partial
Page 867 and 868:
Note 6: Available for V24 printing
Page 869 and 870:
- Select printing of a header on ea
Page 871 and 872:
FIELD ADD. SERVICES EXTERNAL COR- R
Page 873 and 874:
External forwarding The operator is
Page 875 and 876:
The schema definition of an XML tic
Page 877 and 878:
- cost of counter reminder. If the
Page 879 and 880:
8.4.13 Appendix and the installatio
Page 881 and 882:
Outgoing call: the outgoing call is
Page 883 and 884:
Loopback mode This field defines th
Page 885 and 886:
extracted via the Open Telephony Se
Page 887 and 888:
- Use the MS Windows Add/Remove Pro
Page 889 and 890:
configuration program. 8.5.2.3.2 "L
Page 891 and 892:
The CSTA processing capacities of t
Page 893 and 894:
8.6.2.1.6 Conference Call The Confe
Page 895 and 896:
8.6.2.1.12 Monitor Start The Monito
Page 897 and 898:
The Get Name service returns the na
Page 899 and 900:
8.6.4.2 TAPI SERVER/CLIENT CONNECTI
Page 901 and 902:
8.6.5.2 Configuration - To create v
Page 903 and 904:
• Supervision keys By OMC (Expert
Page 905 and 906:
8.7.3 Using a NPTT Doorphone 8.7.3.
Page 907 and 908:
By OMC (Expert View), select: Subsc
Page 909 and 910:
Select the Network Management Contr
Page 911 and 912:
The recommended procedure is the fo
Page 913 and 914:
- For fixed TEI, assign a value bet
Page 915 and 916:
8.10.1.3 INTERNAL PLLs The system m
Page 917 and 918:
- Management of audio files using O
Page 919 and 920:
8.12.1.2 Topology - The attendant i
Page 921 and 922:
Automatic Welcome - Configuration p
Page 923 and 924:
8.13.1.3.2 Supported OS list for PC
Page 925 and 926:
Internet Explorer Mozilla Firefox S
Page 927 and 928:
9.1 Overview Web-Based Tool is a mo
Page 929 and 930:
Dump System Service Details Operato
Page 931 and 932:
- Enter the audio file name in the
Page 933 and 934:
9.1.3.2 Hardware Information The Ha
Page 935 and 936:
- Disk SMART - System Files - Netwo
Page 937 and 938:
9.1.3.4.2 Memory info The Memory In
Page 939 and 940:
- NMC: is the Alcatel-Lucent Networ
Page 941 and 942:
9.1.4.1.4 Traceroute The Traceroute
Page 943 and 944:
9.1.4.3 NTP status The NTP status l
Page 945 and 946:
The name of the DAP log file link i
Page 947 and 948:
9.1.5 VoIP Information The VoIP lin
Page 949 and 950:
The maximum number of 'hold reserva
Page 951 and 952:
- Delay (in ms): delay between the
Page 953 and 954:
10.1 General Presentation 10.1.1 Ov
Page 955 and 956:
- Alcatel-Lucent OmniTouch 8118/812
Page 957 and 958:
Figure 10.2: Call flows *Callers ca
Page 959 and 960:
This configuration uses a local are
Page 961 and 962:
Caution 2: Run ACD Setup before con
Page 963 and 964:
Function Start End Base Local call
Page 965 and 966:
The General tab consists of the fol
Page 967 and 968:
2. Check the Mailbox box of the gro
Page 969 and 970:
2. In the Agents Sets area, click M
Page 971 and 972:
3. Set the ACD ports to 0. 4. Click
Page 973 and 974:
_nigeb-egnahc_ _dne-egnahc_ - A
Page 975 and 976:
2. Enter the name of the group in G
Page 977 and 978:
2. Select one of three possible act
Page 979 and 980:
Example 2: If x = 3, the announceme
Page 981 and 982:
etween 1 and 8. The same level of p
Page 983 and 984:
The defined exceptional days are li
Page 985 and 986:
2. Select the planning of your choi
Page 987 and 988:
• Agent n°. (number) : identific
Page 989 and 990:
10.3.3.1.3 Login/logout from a phon
Page 991 and 992:
Force automatic call answer feature
Page 993 and 994:
10.3.4.2.2 Description of the Call
Page 995 and 996:
• No hard disk is necessary • L
Page 997 and 998:
Figure 10.21: Example of Call Routi
Page 999 and 1000:
Figure 10.23: .csv File before Modi
Page 1001 and 1002:
• select an announcement to be ad
Page 1003 and 1004:
10.4.2.2.4 Recording Automatic Call
Page 1005 and 1006:
- AG:: Agent xx-yyy where xx is the
Page 1007 and 1008:
11.1 OMC 11.1.1 Overview OMC is the
Page 1009 and 1010:
personal belongings. For more infor
Page 1011 and 1012:
- OLITEC USB ISDN 128K - Multitech
Page 1013 and 1014:
In the current version of the syste
Page 1015 and 1016:
- In OMC, select Options > Change P
Page 1017 and 1018:
Click on the After OMC disconnect b
Page 1019 and 1020:
The OmniPCX Office software (with o
Page 1021 and 1022:
Features included Easy EasyPlus Exp
Page 1023 and 1024:
Features included Easy EasyPlus Exp
Page 1025 and 1026:
11.1.8.2 Individual types of audio
Page 1027 and 1028:
Note: In order to transfer audio fi
Page 1029 and 1030:
6. Specify the destination path for
Page 1031 and 1032:
11.2.1.1.1 ACCESS TO THE MMC Access
Page 1033 and 1034:
11.2.1.1.5 CONFIGURABLE FEATURES IN
Page 1035 and 1036:
11-29
Page 1037 and 1038:
station must be switched off by pre
Page 1039 and 1040:
Restriction level of trunk groups (
Page 1041 and 1042:
NUMBER makes it possible to erase A
Page 1043 and 1044:
KEY FUNCTION PARAMETERS SelFwd Sele
Page 1045 and 1046:
Note 2: This paragraph only describ
Page 1047 and 1048:
concerned (4 services maximum). By
Page 1049 and 1050:
Press COUNT. 11.2.3.1.1 PRINTING OF
Page 1051 and 1052:
11-45
Page 1053 and 1054:
Confirm the password by entering it
Page 1055 and 1056:
TRANSP: by successively pressing th
Page 1057 and 1058:
MODIFY after pressing this key, ent
Page 1059 and 1060:
DIRECT : by successively pressing t
Page 1061 and 1062:
transmitted on each access. For exa
Page 1063 and 1064:
Press GROUPS. 11.2.9.1.1 CALL PICKU
Page 1065 and 1066:
Press RSTSYS. TEMP: by successively
Page 1067 and 1068:
11.2.11.1.4MANAGER-ASSIST PROFILES
Page 1069 and 1070:
11.2.12 Metering Configuration 11.2
Page 1071 and 1072:
MASK: by successively pressing this
Page 1073 and 1074:
CSTOLM: by successively pressing th
Page 1075 and 1076:
The personal speed dial numbers, RS
Page 1077 and 1078:
DESIGNATION INTNUM grants access to
Page 1079 and 1080:
Parking Send MF num Doorphone Parki
Page 1081 and 1082:
11.2.18.1 Operation WARNING: This f
Page 1083 and 1084:
egistration is based on the recepti
Page 1085 and 1086:
TIME makes it possible to state the
Page 1087 and 1088:
Press ARSCAL. 11.2.23.1.1TIME RANGE
Page 1089 and 1090:
Press NAME. Enter the Multi Reflexe
Page 1091 and 1092:
- NIGHT: lets you access voice guid
Page 1093 and 1094:
12.1 Problem-Solving Methodology 12
Page 1095 and 1096:
- Wait for the LED to go to steady
Page 1097 and 1098:
according to the default numbering
Page 1099 and 1100:
network. Default parameters are con
Page 1101 and 1102:
phone set on connection. To keep in
Page 1103 and 1104:
At the end of the session, a messag
Page 1105 and 1106:
Type Message Location Additional In
Page 1107 and 1108:
Page 1109 and 1110:
Page 1111 and 1112:
Page 1113 and 1114:
Page 1115 and 1116:
Page 1117 and 1118:
Page 1119 and 1120:
Page 1121 and 1122:
Page 1123 and 1124:
Before R3.1 R3.1 R4.0 R4.1 R5.0 R5.
Page 1125 and 1126:
Before R3.1 R3.1 R4.0 R4.1 R5.0 R5.
Page 1127 and 1128:
21H : slave DECT base interface 22H
Page 1129 and 1130:
a version which does not correspond
Page 1131 and 1132:
- there is a power supply problem (
Page 1133 and 1134:
12.7.1.1.2 Web-Based Tool Web-Based
Page 1135 and 1136:
- Click on the Submit button. Insta
Page 1137 and 1138:
13.1 Certificate Management 13.1.1
Page 1139 and 1140:
4. Select the appropriate path to s
Page 1141 and 1142:
- My IC Web for Office - PIMphony A
Page 1143 and 1144:
access and block remote access), re
Page 1145 and 1146:
13.2.2.2 Password configuration All
Page 1147 and 1148:
2. Enter the current OMC session pa
Page 1149 and 1150:
14.1 Software Keys 14.1.1 Services
Page 1151 and 1152:
For a system in limited mode, when
Page 1153 and 1154:
Controlled services Relevant softwa
Page 1155 and 1156:
Page 1157 and 1158:
Page 1159 and 1160:
arborescence. NTP Protocol distribu
Page 1161 and 1162:
The 500 DECT has no automatic or pe
Page 1163 and 1164:
14.2.6 Configuration The NTP synchr
Page 1165 and 1166:
IP sets and Alcatel-Lucent OmniSwit
Page 1167 and 1168:
3. Define the range of IP addresses
Page 1169 and 1170:
Note 3: Carefully verify your entri
Page 1171 and 1172:
15.1 A ACD Automatic Call Distribut
Page 1173 and 1174:
15.4 D DAP DECT Access Point DASS2
Page 1175 and 1176:
Internet Protocol Security. Standar
Page 1177 and 1178:
POP3 Post Office Protocol. Standard
Page 1179 and 1180:
TERMINAL GROUP Series of terminals
show all

Expert Documentation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?