Expert Documentation

4. Enter the current OMC session password to activate the reset.
5.1.4 500 DECT Handset
5.1.4.1 Registering the Handset
5.1.4.1.1 Prerequisite
Before making a call the Handset must be registered to a DECT system.
The message "Register" is displayed on the screen in case of no registration.
The Handset can operate with a maximum of eight DECT systems.
To register the Handset the following information must be available:
- PARK code: required if more than one DECT system overlaps in your location
- DECT system name
- Phone number allocated to the Handset
5.1.4.1.2 Registering Procedure
To register the Handset:
1. Declare the handset on the PCX, see: Declaring the Handset on the OmniPCX Office
2. Select the phone system, see: Selecting the Telephone System
5.1.4.1.3 Declaring the Handset on the OmniPCX Office
The 500 DECT is automatically detected as 500 DECT Evo handset.
1. In OMC, select Users/Base stations List
The Users/Base stations List window is displayed
2. Click Add
The Add/User window is displayed
3. Select DECT\PWT handsets
4. Select the number of device to create (default: 1)
5. Keep the proposed number or select another free number
6. Click OK
7. Select the entry corresponding to the created set in the list and click the GAP Reg button
The Register GAP handset window opens
8. For IBS DECT solution:
a. Launch the registration on the handset: see Entering the PIN Code and Entering the
PARK Code
b. Select the entry corresponding to the created set in the Unassigned Handsets list
c. When the IPUI of the device registering appears in the list, select it
d. Click the Assign button
e. Click Return
9. For IP-DECT solution:
5-53