Expert Documentation

Chapter 3
If an incoming call arrives while saving a number (temporary memory or individual
directory), this call will be released (as during customization).
- Saving a number in the individual directory (R2.0): a number may be saved in the
individual directory under the following conditions:
• when a call is in progress
• during review of the unanswered calls directory (text mail)
• during use of the retransmitted numbers list
- As of R7.1, the user can choose to display the calling party name or the calling party
number. During ringing or conversation, a press on the i key switches between the two
display modes.
The initial display is based on the parameter: Name Display. If this parameter is enabled,
the initial display is the calling party name.
Note:
This feature works only if the calling party name is available.
This feature is available only for the following sets:
• Alcatel-Lucent IP Touch 4028 Phone, Alcatel-Lucent IP Touch 4038 Phone,
Alcatel-Lucent IP Touch 4068 Phone
• Alcatel-Lucent 4029 Digital Phone, Alcatel-Lucent 4039 Digital Phone, Advanced
Reflexes
• Alcatel-Lucent 300 DECT Handset, Alcatel-Lucent 400 DECT Handset, Alcatel Mobile
Reflexes 100 and Alcatel Mobile Reflexes 200. On these sets, a long press on the
phone book key is used to switch between name and number display.
3.26.2 Configuration procedure
3.26.2.1 Configuration
- To specify whether or not to authorize the "Automatic call setup on going off hook" feature
for each station:
• by OMC (Expert View): Users/Base stations List -> Users/Base stations List -> Details
-> Misc. -> Hotline
• by MMC-Station: User or Subscr -> AutoCa -> Active
- To validate the "Automatic answer for external call" feature for all sets in automatic answer
mode.
• by OMC (Expert View):System Miscellaneous -> Feature Design -> Part 2-> "Automatic
answer for external call" ->
- If the "Automatic call setup on going off hook" feature is authorized, define whether the call
is immediate or after a time-out and define the call destination for each station:
• by OMC (Expert View): Users/Base stations List -> Users/Base stations List -> Details
-> Misc. -> Hotline
• by MMC-Station: User or Subscr -> AutoCa -> Temp
- To modify the default time-out for the "delayed" automatic call setup on going off hook -
OMC (Expert View) only:
3-72