Expert Documentation

Chapter 5
2. Right-click the ARS OMC windows and select IP parameters to display the IP parameters
fields
3. Right-click the ARS OMC windows and select Add
4. Enter the following parameters:
Activation
Network
Prefix
Substitute
TrGpList
Called (ISVPN/H450)
table 5.53: Common fields
Enter yes
Enter priv
Enter the trunk group prefix configured in the internal
numbering plan
Enter the trunk group prefix configured in the internal
numbering plan
Enter the index of T2 trunk
Enter het
5. Right-click the ARS OMC windows and select IP Parameters
Configure the following parameter:
Destination
6. Right click and select Apply
Configuring Installation Numbers
table 5.54: IP parameters fields for a T2 Trunk Group
Select Not IP
1. In OMC (Expert View) select: System > Numbering > Installation Numbers
The Installation Numbers window is displayed
2. Enter the Installation Number and click OK
Saving Configuration
1. In OMC (Expert View), select Comm > Read all from the PCX from the menu bar.
The Read from the PCX window is displayed
2. Select Classic Data and validate the Central Services check box
3. Click OK and wait until a progress bar is displayed
4. Once the progress bar disappears, select File > Save as from the menu bar
The Save as Database Window is displayed
5. Enter a file name and click the Save as button
Configuring the SIP Trunk
Checking Hardware and Limits
1. In OMC (Expert View) select: System > Hardware and Limits > LAN/IP Configuration >
Boards tab
2. Check the IP addresses of boards
Configuring VOIP: General Parameters
5-76