Expert Documentation

- To activate headset mode (MMC-Station Administrator session only)
Subscr ->No° of station -> Headst -> Choice
Note:
Headset mode can also be activated by customizing the stations; see Customizing Stations - Detailed
description for how this is done.
3.56.3 Operation
3.56.3.1 USE
P.K.: Programmed Key – defined by OMC (Expert View) or MMC-Station
F.K.: Fixed Key
Answer a call manually --
Activate automatic answer
mode (*)
Without Handsfree feature,
--
With Handsfree feature
Resource Key or F.K.:
Handsfree
F.K.: Intercom or P.K.:
AutAns or Intercom
(*) When a caller is camped-on the station using automatic answer, the user enters into
conversation with the caller after pressing the "End" key and the transmission of a beep.
3.57 Appointment Reminder/Wake Up Call
3.57.1 Overview
3.57.1.1 DESCRIPTION
A user can have his station ring at a time he can program himself. This is the "Appointment
Reminder" function in the case of companies and the "Wake-Up" call in the case of a hotel (in
the various numbering plans, it is referred to as "Wake-Up").
The "Appointment reminder" can be activated either:
- every day at the programmed time: this is a "permanent" appointment
- or only once in the 24 hours following programming: this is a "temporary" appointment.
3.57.1.2 ADDITIONAL INFORMATION
- When the station is busy at the time the appointment reminder or wake-up call is made, the
station does not ring but the user hears a specific tone.
- To avoid traffic overload, stations that have placed wake-up call requests are called in
groups of 5, with a default time lapse of 2 seconds between 2 groups
- Number of analog stations called simultaneously: maximum of 4 per SLI board
- You can review the appointment reminder/wake-up call status for each station in:
3-157