Expert Documentation

Chapter 5
Replacing a DAP
To replace a DAP:
1. Unplug the DAP
2. In OMC, select Users/Base stations List
3. From the list, select the DAP to remove
4. Click the Detail button
5. Click the IP/SIP button.
6. Enter the MAC address of the new DAP in the MAC address field.
7. Confirm your entry.
8. Plug the new DAP.
Note:
The list of registered handsets is then retrieved from the other DAPs.
Synchronizing DAPs
The DECT handsets are registered in both the OmniPCX Office and the DAP. If the DAP is
unavailable, some handsets can remain in the DAP after being removed from the OmniPCX
Office.
To synchronize OmniPCX Office and the DAPs:
1. In OMC, select IP Dect > IP DECT commands
2. Select Synchronize all
3. Confirm your entry.
Note:
This command keeps all IP-DECT handsets that are in the Subscriber list of OMC. All other handsets
in the DAPs are removed.
Removing all subscriptions in DAPs
To remove all subscriptions in DAPs:
1. In OMC, select IP Dect > IP DECT commands
2. Select Terminate all
3. Confirm your entry.
Modifying DAP web administration page password
The DAP has a Web administration page which needs a password for access. For IP-DECT
DAP administrator password there is no default password and the password can only be reset.
To modify this password:
1. In OMC, select Subscriber miscellaneous > Passwords -> SIP phone Administrator
passwords
2. Click the Reset button for IP-DECT DAP
3. Confirm the reset action.
5-52