Expert Documentation

Chapter 3
The Audio control box is unchecked by default. That means, by default, audio signaling is
present during a call notification. It is used to link the Supervision Groupware key with an
existing Audio Signal Supervision key. The Audio Signal Supervision key allows to disable or
enable the audio signaling of the call notification. See below the different scenarii following the
configuration of the keys:
Behavior of the Audio Signalling for Groupware
Notification
Groupware
Supervision
Key
Not associated
with Audio Signal
Supervision Key
Associated with
Audio Signal Supervision
Key
State = OFF
State = ON
State = OFF
State = ON
Audio Signal Supervision Key
Key Not
Configured
No Notif
No Beep
Notif
+ Beep
No Notif
No Beep
Notif
+ Beep
Configured
State = OFF
No Notif
No Beep
Notif
+ Beep
No Notif
No Beep
Notif
+ No Beep
State = ON
No Notif
No Beep
Notif
+ Beep
No Notif
No Beep
Notif
+ Beep
The Clear all button deletes all the programmed directory numbers for the supervised
subscriber.
3.49 Forwarding to Voice Mail Unit
3.49.1 Overview
3.49.1.1 DESCRIPTION
Users can activate unconditional call forwarding or forwarding on busy for their own calls (see
"Forwarding"), diverting them to the integrated Voice Mail Unit.
If the Voice Mail Unit is configured as an answering device, the callers can leave a spoken
message.
3.49.1.2 ADDITIONAL INFORMATION
For more details on the Alcatel-Lucent OmniPCX Office Communication Server integrated
Voice Mail Unit, see "Integrated Voice Mail Unit".
Alcatel-Lucent OmniPCX Office Communication Server also provides the facility to manually
transfer an answered call to the voice mailbox of a third party. For more information on this,
see "Transferring to Voice Mail of Third Party".
3.49.2 Configuration procedure
3.49.2.1 CONFIGURATION
- Select the type of calls (internal, external, or both) to be forwarded:
3-136