Expert Documentation

egistration is based on the reception of an access right sent by the GAP DECT handset (after
a move on the part of the user). Only one GAP DECT handset can be registered at a specific
time.
PERM makes it possible to select a permanent association with the system.
VISIT makes it possible to select a temporary association with the system; enter the date on
which the mobile is to be automatically disconnected from the system and validate.
MODE makes it possible to define the operating mode for the GAP DECT handset: Bas, Enh
or UA (WUA: significant choice for UA + GAP DECT).
Data associated with a UA DECT handset - WUA1
A UA DECT handset is registered manually by entering its IPUI.
PERM makes it possible to select a permanent association with the system.
VISIT makes it possible to select a temporary association with the system; enter the date on
which the mobile is to be automatically disconnected from the system and validate.
IPUI makes it possible to modify the DECT handset IPUI value; enter 14 octal digits and
validate.
11.2.19.1.3READING OF THE DATA CONCERNING MOBILES - HANDST
HANDST
makes it possible to display the data (directory number, type of association with
the system, IPUI) relative to all the DECT mobiles declared in the system.
GOTO makes it possible to display the data of a specific mobile; enter the directory number of
the mobile whose data you wish to see.
11.2.19.1.4BASE STATION FEATURES - BASES
Press BASES
and then enter the slot number and the equipment number of the interface
to which the base station to be parameterized is connected.
NAME makes it possible to modify the name of the base station.
OUTINS makes it possible to display the status of the base station concerned. INSERV and
OUTOFS makes it possible to put the base station concerned in or out of service.
DETAIL displays the number of DECT channels (3, when the base station is connected to the
system via 1 UA link, or 6 when it is connected via 2 UA links) and gives access to the
following sub-features for the 4070 IO base station:
- LENGTH: by successively pressing this key, indicate the connection distance from the
base to the system: short line (0-400 m), average line (400-800 m) or long line (800-1200
m). This data is necessary for synchronization.
- ANTDIV: by successively pressing this key, indicate whether the 2 antennas (Diversity) or
only the first (No diversity) are used.
- FIRMID: reading the software version currently on the base station.
Note: Alcatel-Lucent OmniPCX Office Communication Server R5.1 embeds only 1
software version of the base station. 2 software versions (1G and NG) can be downloaded
during the system's start phase. Base stations are plug and play devices.
- BOOTID: reading the software version for initialization of the base station.
DELSET makes it possible to delete the data relating to the base station concerned.
11-77