SFO Template - Office of Construction & Facilities Management Home

More documents

Recommendations

Info

MAY 2009SOLICITATION FOR OFFERS OUTPATIENT CLINIC SFO NO. VA-101-XX-RP-XXXX[INSERT LOCATION OF FACILITY]B. SubmittalsBefore work is started, or sample panels are prepared, submit manufacturer's literatureindicating brand label, product name, and product code as of the date of contract award. Eachcoating system is to be from a single manufacturer. All coats on a particular substrate must befrom a single manufacturer.Sample Panels: After painters' materials have been approved and before work is started,submit sample panels showing each type of finish and color specified. Panels to show colorshall be composition board, 4 inch x 10 inch x 1/8 inch [101.6 mm x 254 mm x 3.175 mm];Panels to show transparent finishes shall be wood of same species and grain pattern as woodapproved for use, 4 inch x 10 inch face x 1/4 inch [101.6 mm x 254 mm x 6.35 mm] thickminimum.C. ProductsProvide the best quality grade of the various types of painting materials and coatings asregularly manufactured by acceptable paint manufacturer. Materials not displaying themanufacturer’s identification as a standard, best-grade product will not be acceptable. Paintproducts of the following manufacturers are acceptable:Dunn-EdwardsFrazeeICISherwin-WilliamsUse primers with pigment and vehicle recommended by top coat manufacturer as compatiblewith substrate and finish coats specified. Use only thinners approved by the paintmanufacture and use only within recommended limits.Use ready-mixed (including colors), except two component epoxies, polyurethanes,polyesters, paints having metallic powders packaged separately, and paints requiring specifiedadditives.Paint materials shall conform to the restrictions of the local Environmental and Toxic Controljurisdiction. Volatile Organic Compounds (VOC) content of paint materials shall not exceedlocal, state or district requirements. Lead-base paints shall not be used. Materials shall notcontain asbestos, zinc-chromate, strontium-chromate, cadmium, mercury or mercurycompounds, or free crystalline silica. Materials shall not contain any of the ACGIH-BKLT andACGHI-DOC confirmed or suspected human carcinogens.D. ApplicationUnless otherwise specified, apply paint in three coats: prime, body, and finish. When twocoats applied to prime coat are the same, the first coat applied over primer is body coat andthe second coat is the finish coat. Apply each coat evenly and cover substrate completely.Finish surfaces to show solid even color, free from runs, lumps, brushmarks, laps, holidays, orother defects.E. Paint ScheduleGypsum Wallboard, except where epoxy coating (SC) is required:1 coat primer sealer applied prior to texturing1 coat pigmented sealer/primer2 coats acrylic latex enamel //low luster// //semi-gloss// //gloss//Part I: Basic Solicitation Requirements – Page 166 of 196Lessor __________ Gov’t. ____________________ of __________ Pages
MAY 2009SOLICITATION FOR OFFERS OUTPATIENT CLINIC SFO NO. VA-101-XX-RP-XXXX[INSERT LOCATION OF FACILITY]Gypsum Wallboard epoxy coating, (SC):1 coat primer sealer2 coats waterborne epoxy //semi-gloss// //gloss//Ferrous and Galvanized Metal:1 coat vinyl acrylic primer or vinyl pre-wash primer (if not factory-primed)2 coats acrylic latex enamel //low luster// //semi-gloss// //gloss//Wood – Transparent Finish:Provide hand-wiped stained finish, water-based, clear acrylic, premium grade //glossand color as selected// //[specify gloss and color//Stain2 coats clear finish7.11 HANDRAILS, WALL GUARDS AND CORNER GUARDSAn estimate of base quantities of each type of handrail, wall guard, and corner guard thatshould be included in the proposed rental rate is indicated in Schedule C. Adjustments will bemade at the end of the project based on actual measurement and payment will be made perthe pre-negotiated unit cost for these items.Stainless steel shall conform to ASTM A167, Type 302B. Extruded aluminum componentsshall conform to ASTM B221, Alloy 6063, Temper T5 or T6. Resilient materials shall beextruded and injection molded acrylic vinyl or extruded polyvinyl chloride meeting followingrequirements:Minimum impact resistance of 2150 ft-lbs [200 Nm] (when tested in accordance withASTM D256 (Izod impact, ft-lbs per inch notch).Class 1 fire rating when tested in accordance with ASTM E84, having a maximumflame spread of 25 and a smoke developed rating of 450 or less.shall be rated self extinguishing when tested in accordance with ASTM D635Material shall be labeled and tested by Underwriters Laboratories or other approvedindependent testing laboratory.Provide resilient materials with integral color with all colored components matched inaccordance with SAE J 1545 to within plus or minus 1.0 on the CIE LCH scales.7.11.1 HANDRAILS AND WALL GUARDSExcept in administrative areas, provide handrails and wall guards on both sides of allcorridors. Provide chair rail at locations indicated in Schedule C. Provide continuousreinforcing in the wall attachment of handrails and bumper guards.Handrail/Wall Guard Combination shall consist of snap-on covers of resilient material,minimum 0.078-inch thick, free-floated on a continuous, extruded aluminum retainer, minimum0.072-inch thick, anchored to wall at maximum 32 inches on center.Part I: Basic Solicitation Requirements – Page 167 of 196Lessor __________ Gov’t. ____________________ of __________ Pages
Page 1 and 2:
Department ofVeterans AffairsOffice
Page 3:
MAY 2009SOLICITATION FOR OFFERS OUT
Page 6 and 7:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128: MAY 2009SOLICITATION FOR OFFERS OUT
Page 177: MAY 2009SOLICITATION FOR OFFERS OUT
Page 227 and 228: SOLICITATION FOR OFFERS OUTPATIENT
Page 229 and 230:
SOLICITATION FOR OFFERS OUTPATIENT
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
SOLICITATION FOR OFFERSOUTPATIENT C
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Refer to Part I Section 10 and the
Page 337 and 338:
GSA FORM 1364A - PROPOSAL TO LEASE
Page 339 and 340:
Block 8a(4)Annual Rate per Rentable
Page 341 and 342:
For purposes of the price evaluatio
Page 343 and 344:
IV. SECTION IV -OWNER IDENTIFICATIO
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421:
show all

SFO Template - Office of Construction & Facilities Management Home

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?