FR-F700 INSTRUCTION MANUAL (BASIC) - MRO Stop
FR-F700 INSTRUCTION MANUAL (BASIC) - MRO Stop
FR-F700 INSTRUCTION MANUAL (BASIC) - MRO Stop
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7.4 Heatsink protrusion attachment procedureHeatsink protrusion attachment procedureWhen encasing the inverter in an enclosure, the generated heat amount in an enclosure can be greatly reduced byinstalling the heatsink portion of the inverter outside the enclosure. When installing the inverter in a compactenclosure, etc., this installation method is recommended.7.4.1 When using a heatsink protrusion attachment (<strong>FR</strong>-A7CN)For the <strong>FR</strong>-F720-2.2K to 110K, <strong>FR</strong>-F740-0.75K to 160K, a heatsink can be protruded outside the enclosure using aheatsink protrusion attachment (<strong>FR</strong>-A7CN). For a panel cut dimension drawing and an installation procedure of theheatsink protrusion attachment (<strong>FR</strong>-A7CN) to the inverter, refer to a manual of "heatsink protrusion attachment (<strong>FR</strong>-A7CN01 to 11)".7.4.2 Protrusion of heatsink of the <strong>FR</strong>-F740-185K or more(1) Panel cuttingCut the panel of the enclosure according to the inverter capacity.• <strong>FR</strong>-F740-185K, 220K• <strong>FR</strong>-F740-250K, 280K, 315K13484200 2006-M10 screw15662300 3006-M10 screw985954Hole984954Hole18• <strong>FR</strong>-F740-355K, 400K(Unit: mm)15• <strong>FR</strong>-F740-450K, 500K, 560K(Unit: mm)7716-M10 screw9768-M10 screw315 31521300 300 3001300125821Hole15501508Hole21(Unit: mm)21(Unit: mm)SPECIFICATIONS1337
Change language